809896
41
Zoom out
Zoom in
Previous page
1/190
Next page
Using the WebUI 41 Back to Contents
M100 KLE Administrator and Provisioning Manual
Authentication Name If authentication is enabled on the server, enter the
authentication name (or authentication ID) for
authentication with the server.
Authentication Password If authentication is enabled on the server, enter the
authentication password for authentication with the server.
Dial Plan Enter the dial plan, with dialing strings separated by a |
symbol. See “Dial Plan” on page 42.
Inter Digit Timeout (secs) Sets how long the M10 KLEwaits after any "P" (pause) in
the dial string or in the dial plan.
Maximum Number of
Calls
Select the maximum number of concurrent active calls
allowed for that account.
Feature Synchronization Enables the M100 KLE to synchronize with BroadWorks
Application Server. Changes to features such as DND, Call
Forward All, Call Forward No Answer, and Call Forward
Busy on the server side will also update the settings on the
M10 KLEmenu and WebUI. Similarly, changes made using
the M10 KLEor WebUI will update the settings on the
server.
DTMF method Select the default DTMF transmission method. You may
need to adjust this if call quality problems are triggering
unwanted DTMF tones or you have problems sending
DTMF tones in general.
Unregister after reboot Enables the phone to unregister the account(s) after
rebooting-before the account(s) register again as the
phone starts up. If other phones that share the same
account(s) unregister unexpectedly in tandem with the
rebooting M100 KLE, disable this setting.
Call Rejection Response
Code
Select the response code for call rejection. This code
applies to the following call rejection cases:
User presses for an incoming call (except
when Call Forward Busy is enabled)
DND is enabled
Phone rejects a second incoming call with Call
Waiting disabled
Phone rejects an anonymous call with Anonymous
Call Rejection enabled
Phone rejects call when the maximum number of
calls is reached
Setting Description
Reject
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M100 KLE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M100 KLE in the language / languages: English as an attachment in your email.

The manual is 2.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info