809851

Snom D862 Manual

17
Zoom out
Zoom in
Previous page
1/33
Next page
17
D862 Short User Manual Getting to Know Your Phone
Hard keys
Hard keys are an integral part of the D865 phone user interface (PUI) and allow user input and
interaction. Please refer to chapter "At a glance" on page 14 to identify hard keys on the phone
and learn about their factory values. These 43 hard keys have the following functionality:
• 4 context-sensitive, programmable function keys (F1 - F4) are located directly below the
display and can be programmed on the Function Keys page of the phone's web interface (WUI)
with a number of key events; these functions will then be available when the phone is in idle
mode.
• 1 alphanumeric keypad consisting of 12 hard keys, located in the center of the lower device
part, further details see page 15.
• 5-way navigation key (up, down, left, right, confirmation) and 1 cancel key are found on
the right side next to the alphanumeric keypad and can be programmed with the key events
available in their drop-down menus, further details see page 15.
• 4 preprogrammed, variably programmable function keys have their factory settings printed on
the key, see page 15. Other functionalities can also be programmed onto them.
• 5 audio control keys are used to adjust the volume (2), for muting and unmuting the
microphone (1), to activate speakerphone (1) and headset mode (1), further details see page
15.
• 8 SmartLabel keys (freely programmable function keys with LEDs P1 - P32) on the both sides
of the display control the SmartLabels, further details see page 15.
User mode/administrator mode
Snom phones can be operated in administrator or user mode. In administrator mode, all settings
are accessible and can be modified; in user mode, a number of settings are not accessible. The
factory default is user mode.
For the D8xx series phones, user and administrator mode on the phone and on the web interface
are set independently of each other. If the phone is running in user mode, you will still able to open
the phone manager in admin mode if you have the admin name and password.
When the phone is running in user mode, the administrator password is required to switch to
administrator mode. If your phone is administered centrally, user mode may be the rule. Please
check with your network administrator or IP provider.
When the web interface is opened for the first time upon initialization or after a reboot, you will see
the Phone Manager. See "Initialization" on page 11 for further information.
User names and passwords
We urge you to set an administrator PIN and an HTTP password to protect your phone. There are
no default passwords. Please note:
• Administrator PIN. If you do not set an administrator password, an unauthorized third party
with access to the phone could set an administrator password unknown to you. In such a case,
you would no longer be able to switch from user mode to administrator mode to regain access
to all phone settings.
• HTTP user name and HTTP password. If you do not set these, you make it easier for
experienced hackers to break into your system.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom D862 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom D862 in the language / languages: English as an attachment in your email.

The manual is 5.48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snom D862

Snom D862 User Manual - French - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info