Manual Snom D785 (page 101 of 108) (English)

809871

101

Zoom out

Zoom in

1/108

101

D785 User Manual Appendix 4

IVR This function key can be used for regular calls to an extension that is reached via an

IVR or auto attendant and a number of voice prompts where the caller has to make a

selection by pressing a key after or during the prompt. If you know which keys need to

be pressed in which order in order to reach the desired extension, the entire process can

be automated and considerably speeded up.

The syntax for the "Number" text ﬁeld entry is <phone_number>;dtmf=<n>,<n>, etc. The

angle brackets <>including their content are placeholders for the variables that you

must replace by the actual characters. The comma represents a pause of one second,

and n represents any number key on the alphanumeric keypad.

Example: The number to dial is (917) 555-3814. When the connection has been

established, the caller will hear three prompts. After the ﬁrst prompt, he must press key

1; after the second prompt, he must press 3; and after the third prompt he must press

1 to reach the desired extension. The entry in the "Number" text ﬁeld must look like this:

9175553814;dtmf=1,3,1.

Usage: When the phone is in idle mode, press the key to dial the number. As soon as

the connection has been established, the phone will automatically send the DTMF tones

associated with the alphanumeric keys 1, 3, and 1 with a one-second pause between

them.

(If the function type "IVR" doesn't work on individual phones, try "Speed dial" with the

above description.)

Key Event When this key type is selected, a drop-down menu opens under "Number". For the

available selections, see the following section "Key Events".

Line Default setting for all freely programmable function keys. Incoming calls will go to the

ﬁrst free "line" key, and outgoing calls will use the ﬁrst free line key.

Line keys can be used to make outgoing calls with the identity selected from a particular

key's "Context" menu and to have incoming calls for that identity going to that particular

function key. If the key is busy, the incoming call will go to the ﬁrst free line key.

Multicast Page This function key enables the phone to send multicast streams to IP multicast group

addresses. The multicast IP address and port are entered in the "Number" text ﬁeld

in the format <multicast IP address>:<port> (e.g., 239.255.255.245:5555). The angle

brackets <>including their content are placeholders for the variables that you must

replace by the actual characters.

Please note: This key is for sending multicast streams. To allow reception of multicast

streams, multicast support must be enabled on the phone's web interface, Advanced

settings > SIP/RTP tab > Multicast by setting Multicast Support to "on". You must also

enter the IP addresses of the multicasts you wish to receive in ascending order of

priority, 10 being the highest. In case of simultaneous multicasts, the one with the

highest priority at any given time will override the others.

Park Orbit If a park orbit has been set up on the server, a function key mapped with the Park

Orbit functionality can EITHER serve to park calls on the park orbit OR to park as well

as retrieve calls, depending on the type of server used. Select the server type on

the Conﬁguration Identity page of the context identity, SIP tab, from the "Server Type

Support" drop-down menu. Enter the "phone number" of the Park Orbit and/or the

park position in the text ﬁeld of "Number", for example orbit1@my.proxy.com or 700@

my.proxy.com etc.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Snom D785 in the language / languages: English as an attachment in your email.

The manual is 26.31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snom D785

Snom D785 User Manual - German - 116 pages

Snom D785 Quick start guide - Dutch - 0 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Snom D785 Manual

Product: