621557
86
Zoom out
Zoom in
Previous page
1/93
Next page
86
Key Event When this key type is selected, a drop-down menu opens under "Number". For the
available selections, see the following section "Key Events".
Line Default setting for all freely programmable function keys. Incoming calls will go to
the first free "line" key, and outgoing calls will use the first free line key.
Line keys can be used to make outgoing calls with the identity selected from a
particular key's "Context" menu and to have incoming calls for that identity going to
that particular function key. If the key is busy, the incoming call will go to the first free
line key.
Multicast Page This function key enables the phone to send multicast streams to IP multicast group
addresses. The multicast IP address and port are entered in the "Number" text field
in the format <multicast IP address>:<port> (e.g., 239.255.255.245:5555). The
angle brackets <>including their content are placeholders for the variables that you
must replace by the actual characters.
Please note: This key is for sending multicast streams. To allow reception of
multicast streams, multicast support must be enabled on the phone's web interface,
Advanced settings > SIP/RTP tab > Multicast by setting Multicast Support to
"on". You must also enter the IP addresses of the multicasts you wish to receive in
ascending order of priority, 10 being the highest. In case of simultaneous multicasts,
the one with the highest priority at any given time will override the others.
Park Orbit If a park orbit has been set up on the server, a function key mapped with the Park
Orbit functionality can EITHER serve to park calls on the park orbit OR to park as
well as retrieve calls, depending on the type of server used. Select the server type
on the Configuration Identity page of the context identity, SIP tab, from the "Server
Type Support" drop-down menu. Enter the "phone number" of the Park Orbit and/
or the park position in the text field of "Number", for example orbit1@my.proxy.com or
700@my.proxy.com etc.
Presence If supported by your PBX, the LED of this function key will reflect the presence
status (ringing, busy, available, etc.) of the extension specified in the "Number" text
field. The function key can also be used to dial the extension, usually when the
destination signals availability.
Push2Talk Pressing the function key mapped with "Push2Talk" will establish a two-way
connection to the extension specified in the "Number" text field for as long as the key
is pressed; that extension must have enabled intercom reception on its web interface
(Advanced Settings > Behavior tab > Phone Behavior > Intercom Policy "only in
idle" or "always").
On 870 phones, this key type will establish an Intercom connection.
On 820/821 phones, this key type is only available on keys P2 and P3.
On 760 phones, this key type is not available on key P4.
Shared Line Bridged lines (Bridged Line Appearance (BLA)) ared shared by two or more users;
when one of them is using the line, the others are blocked from using it. This key
type makes it possible to monitor whether a shared line is busy (the LED is lit) or not
(the LED is off). The URI of the shared line is set under "Number".
Appendix 4 - Programmable Functions
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom D715 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom D715 in the language / languages: English as an attachment in your email.

The manual is 5.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snom D715

Snom D715 User Manual - German - 101 pages

Snom D715 Quick start guide - Dutch - 0 pages

Snom D715 User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info