621557
69
Zoom out
Zoom in
Previous page
1/93
Next page
69
D715/snom 715 User Manual Customizing the Phone Settings
3. Click on "Apply" and "Save".
4. Press to save your selection
5. Press for two secondc to return to the idle screen.
Music on hold
As of firmware version 8.7.3.8 firmware downloads include a music on hold (MoH) that is saved locally
on the phone. The default setting for playing music to callers on hold is "off".
Enabling MoH:
1. Open the Advanced page of the phone's web interface.
2. Click on the Audio tab.
3. Change the setting of Play music during hold to "on".
4. Click on "Apply" and "Save".
You can replace the MoH provided by snom with a customized music, either during a firmware
update or separately, as described below. In this case, please keep in mind:
Music - the musical composition itself as well as audio recordings - is
covered by copyright laws; their use in the form of MoH is subject to
licensing fees in most countries. It is your responsibility to comply with
the laws and terms of copyright in your country!
The MoH (mono, sample rate 8000Hz) consists of simple RTP packets (without header, Codec
G711u (uncompressed raw headerless pcmu file)) which are stored in the applications directory in
a file called moh.wav. To replace the stored music, proceed as follows:
1. Convert you music to the format "uncompressed raw headerless pcmu file" with an audio
editor; there are some free audio editors available, for example Audacity and Free Audio Editor
(as of September 2012). The size of the file will be checked by the software. It must not
exceed the following maximums:
3xx phones: 128 kB
7xx- und 8xx-Telefone: 1 Mb
2. Save your music on a TFTP server.
3. Save an XML file with the URL to the TFTP server on a web server. Example (don't forget to
replace the fictional IP address by the actual one!):
<?xml version="1.0" encoding="utf-8" ?>
<uploads>
<file url="tftp://192.168.11.18/moh.wav" type="moh" />
</uploads>
4. Open the Advanced page of the phone's web interface.
5. Click on the Update tab.
6. Enter the URL of the XML file in the text field of Setting URL ein and click on Apply.
Example: http://192.168.11.18/prov/upload_tmp.xml
The XML file will be read during the next reboot, and the file stored on the phone will be
replaced by the file stored on the TFTP server.
7. You should now reenter your usual provisioning server into the text field of Setting URL.
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom D715 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom D715 in the language / languages: English as an attachment in your email.

The manual is 5.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snom D715

Snom D715 User Manual - German - 101 pages

Snom D715 Quick start guide - Dutch - 0 pages

Snom D715 User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info