621555
88
Zoom out
Zoom in
Previous page
1/101
Next page
88
Appendix 5 - Programmable Functions
IVR This function key can be used for regular calls to an extension that is reached via
an IVR or auto attendant and a number of voice prompts where the caller has to
make a selection by pressing a key after or during the prompt. If you know which
keys need to be pressed in which order in order to reach the desired extension, the
entire process can be automated and considerably speeded up.
The syntax for the "Number" text field entry is <phone_number>;dtmf=<n>,<n>, etc.
The angle brackets <>including their content are placeholders for the variables that
you must replace by the actual characters. The comma represents a pause of one
second, and n represents any number key on the alphanumeric keypad.
Example: The number to dial is (917) 555-3814. When the connection has been
established, the caller will hear three prompts. After the first prompt, he must
press key 1; after the second prompt, he must press 3; and after the third prompt
he must press 1 to reach the desired extension. The entry in the "Number" text field
must look like this: 9175553814;dtmf=1,3,1.
Usage: When the phone is in idle mode, press the key to dial the number. As soon
as the connection has been established, the phone will automatically send the DTMF
tones associated with the alphanumeric keys 1, 3, and 1 with a one-second pause
between them.
(If the function type "IVR" doesn't work on individual phones, try "Speed dial" with
the above description.)
Key Event When this key type is selected, a drop-down menu opens under "Number". For the
available selections, see the following section "Key Events".
Line Default setting for all freely programmable function keys. Incoming calls will go to
the first free "line" key, and outgoing calls will use the first free line key.
Line keys can be used to make outgoing calls with the identity selected from a
particular key's "Context" menu and to have incoming calls for that identity going to
that particular function key. If the key is busy, the incoming call will go to the first free
line key.
Multicast Page This function key enables the phone to send multicast streams to IP multicast group
addresses. The multicast IP address and port are entered in the "Number" text field
in the format <multicast IP address>:<port> (e.g., 239.255.255.245:5555). The
angle brackets <>including their content are placeholders for the variables that you
must replace by the actual characters.
Please note: This key is for sending multicast streams. To allow reception of
multicast streams, multicast support must be enabled on the phone's web interface,
Advanced settings > SIP/RTP tab > Multicast by setting Multicast Support to
"on". You must also enter the IP addresses of the multicasts you wish to receive in
ascending order of priority, 10 being the highest. In case of simultaneous multicasts,
the one with the highest priority at any given time will override the others.
88


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom D375 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom D375 in the language / languages: English as an attachment in your email.

The manual is 11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snom D375

Snom D375 User Manual - German - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info