809855
70
Zoom out
Zoom in
Previous page
1/76
Next page
65
Troubleshooting
4. In the User Settings menu, press
4
GHI Wireless microphones.
5. In the Wireless mirophone menu, press
2
A B C Deregister and conrm by pressing
"Yes". If successful, the display will say "Wireless microphones are deregistered".
Their LEDs will ash red and green alternatingly.
6. Press
1
Register to register the rst microphone. The display will say
"Registering....". If successful, you will hear a conrmation tone and the display will
say "Registration succeeded". The status indicator of the registered microphone
switches to a steady red light while the second, unregistered microphone continues
to ash red and green alternately.
7. Press
1
Register again to register the second microphone. The display will say
"Registering....". If successful, you will hear a conrmation tone and the display
will say "Registration succeeded". The status indicator of the second microphone
switches to a steady red light.
8. Remove the microphones from the charging cradle.
9. The LED on each wireless microphone should turn red.
If that still does not work, the battery, the wireless microphone, or the charging cradle
may be defective. Please contact customer service for assistance.
Note: If the wireless microphones are not in the charging cradles when the phone
is powered up, they may need some time to connect to the phone. Please allow at
least one minute for the microphones and the phone to synchronize.
Note: If your have more than one conference phone in the oce, use the locate
function ( > 2
A B C Status >
4
GHI Wireless microphones > press Locate ) on each
conference phone to identify the microphones connected to it. They will not work
with the phone they are not registered at.
The callers cannot hear me when I am using the wireless mic.
Try one of the following:
Make sure the wireless microphone is not muted during a call.
Move the microphone closer to the phone. It may be out of range.
Speak into the microphone from a distance of no more than 3 feet.
Reset the phone. Unplug the AC power cord from the wall outlet. Wait for
approximately 15 seconds, and then plug it back in. Allow at least one minute for
the microphone and the phone to synchronize.
If your have more than one conference phone in the oce, use the locate function (
>
2
A B C Status >
4
GHI Wireless microphones > press Locate ) on each conference
phone to identify the microphones connected to it. They will not work with the
phone they are not registered at.
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom C520-WiMi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom C520-WiMi in the language / languages: English as an attachment in your email.

The manual is 5.98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snom C520-WiMi

Snom C520-WiMi User Manual - German - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info