621556

Snom 715 Manual

85
Zoom out
Zoom in
Previous page
1/93
Next page
85
Appendix 4 - Programmable Functions
DTMF This funcion allows the specification of arbitrary key sequences (allowed digits: "0-
9", "*", "#", "A-D" and flash: "!") which will be sent via DTMF when this key is pressed
during an active call.
Extension This function key allows showing the status (idle, ringing, held call, busy) of another
extension on the key's LED. By pressing the key, it may also be possible to pick
up calls ringing on the extension, to dial the extension when the phone is idle, and
to transfer an incoming call ringing on your own extension. These functionalities
depend on your PBX; for more information, please check snom's interoperability
page and the PBX manual. With Asterisk, generally use BLF rather than this
function.
Forward to All incoming calls will be forwarded to the number (extension or external phone
number) specified under "Number". The key is used to turn forwarding of all calls on
and off; the red LED lights up when the function is turned on.
Intercom
Pressing a function key mapped with "Intercom" will establish a two-way connection
to the extension specified in the "Number" text field; that extension must have
enabled intercom reception on its web interface (Advanced Settings > Behavior
tab > Phone Behavior > Intercom Policy "only in idle" or "always").
"Intercom Policy" settings on the phone being called via intercom:
Always: The intercom call will connect to the called phone automatically; if the
called phone is in a call, that call will be placed on hold.
Only in idle: The intercom call will connect to the called phone automatically if the
called phone is idle. If it is in a call, the incoming intercom call will be announced as
call waiting.
Off: Pressing the intercom key will call the extension specified in the "Number" text
field where it will be treated like any other incoming call, i.e., ring, be forwarded, etc.
IVR This function key can be used for regular calls to an extension that is reached via an
IVR or auto attendant and a number of voice prompts where the caller has to make
a selection by pressing a key after or during the prompt. If you know which keys
need to be pressed in which order in order to reach the desired extension, the entire
process can be automated and considerably speeded up.
The syntax for the "Number" text field entry is <phone_number>;dtmf=<n>,<n>,
etc. The angle brackets <>including their content are placeholders for the variables
that you must replace by the actual characters. The comma represents a pause of
one second, and n represents any number key on the alphanumeric keypad.
Example: The number to dial is (917) 555-3814. When the connection has been
established, the caller will hear three prompts. After the first prompt, he must press
key 1; after the second prompt, he must press 3; and after the third prompt he must
press 1 to reach the desired extension. The entry in the "Number" text field must
look like this: 9175553814;dtmf=1,3,1.
Usage: When the phone is in idle mode, press the key to dial the number. As soon
as the connection has been established, the phone will automatically send the DTMF
tones associated with the alphanumeric keys 1, 3, and 1 with a one-second pause
between them.
(If the function type "IVR" doesn't work on individual phones, try "Speed dial" with the
above description.)
… 85 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom 715 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom 715 in the language / languages: English as an attachment in your email.

The manual is 7,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snom 715

Snom 715 User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info