621556
52
Zoom out
Zoom in
Previous page
1/93
Next page
52
snom 715 User Manual Using the Phone
Rejecting or redirecting incoming calls
This includes manual and automatic rejection and redirection of calls as well as rejection of anonymous
calls.
Manually
If you do not wish to pick up a ringing call, you can take one of the following actions:
Let it ring.
Reject it. Press
. The caller will hear a busy signal.
Reject the current call and place the caller on the Deny list of the phone's directory so that future
calls from that number will not ring on your phone; the caller will always hear the busy signal.
Firmware versions 8.7.2 and higher: Press
for three seconds.
Firmware versions below 8.7.2: If the "Deny All" feature is enabled on the phone, the
Block
button is available in the function key line when an incoming call is ringing. Press the function
key above it.
Enabling the feature: Open the phone's web interface > Advanced > Behavior > Phone
Behavior > Deny All Feature > On.
Editing or deleting entries on the Deny list: Open the phone's web interface > Directory.
See Directories, "Adding/editing entries on the web interface" on page 37 for more
information.
Do a blind transfer to another phone.
1. Press
XFER
.
2. Enter the number you wish to transfer the incoming call to.
3. Press
to complete the transfer. The incoming call will continue ringing at that number.
Automatically
There are three options for rejecting incoming calls automatically or automatically or to have them
forwarded automatically, either always or under certain conditions:
Deny List. Calls from phone numbers on this list will not ring on your phone; callers will hear the
busy signal. For further information on placing phone numbers on the Deny List, see Directory.
DND - do not disturb mode. All incoming calls will be forwarded to the number set in call
forwarding when busy; if there is no setting for call forwarding, callers will hear the busy signal.
Exception: Phone numbers designated VIP in your phone's directory will ring on your
phone even when DND is on.
To be able to turn DND on and off, the function must be mapped onto one of the function
keys. For further information see "Programming the function keys" on page 57.
Call forwarding. For further information, see "Call forwarding" on page 53.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom 715 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom 715 in the language / languages: English as an attachment in your email.

The manual is 7,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snom 715

Snom 715 User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info