629569
7
Zoom out
Zoom in
Previous page
1/36
Next page
3. USE
EN
7
3.3.2 Electronic ignition hotplate (depending on model)
WARNING
WARNING
Make sure there are no pans or any other objects on the burners when igniting.
To ignite the burner, gently push in and turn the control knob to position HIGH FLAME and, keeping the knob
pushed in, at the same time press the electronic ignition pushbutton. Once the burner is lit, keep the knob
pushed in for a few seconds to ensure the flame remains lit.
CAUTION
CAUTION
If the burner does not ignite immediately repeat ignition after having followed each
step below:
Turn the knob to “Low flame ”
• Proceed with manual ignition
• Check there is sufficient gas in the gas bottle.
If the appliance still does not ignite shut off the gas supply at the main gas tap and
contact your local dealer.
3.3.3 Manual ignition hotplate
Manual ignition when the appliance is not fitted with the electronic ignition feature or in the event of failure
in the electronic ignition.
WARNING
WARNING
Make sure there are no pans or any other objects on the burners when igniting.
To ignite the burner, gently push in and turn the control knob to position HIGH FLAME and, keeping the knob
pushed in, at the same time light the burner with a match or gas lighter. Once the burner is lit, keep the knob
pushed in for a few seconds to ensure the flame remains lit.
CAUTION
CAUTION
If the burner does not ignite immediately, check there is sufficient gas in the gas
bottle.
If the appliance still does not ignite, shut off the gas supply at the main gas tap and
contact your local dealer.
3.3.4 Hotplate flame regulation
To regulate the flame turn the knob to the desired cooking flame.
3.4 Oven
CAUTION
CAUTION
The oven burner must be ignited only with the oven door fully open.
WARNING
WARNING
The wire shelf, drip tray and oven dish when in the oven must be positioned so as to
avoid coming into contact with the flames.
If the burner flame goes out accidentally, turn off the gas knob and wait one minute
before re-igniting.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smev PI8403 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smev PI8403 in the language / languages: English as an attachment in your email.

The manual is 2,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info