314861
22
Zoom out
Zoom in
Previous page
1/24
Next page
GB
22
7. TROUBLESHOOTING
This product complies with current safety regulations governing electrical equipment. For safety reasons, all
technical inspections or repairs must be performed by qualified technicians in order to prevent hazardous
situations for users.
If the machine does not work, before calling the Service Centre and spending money unnecessarily, check that
the operations indicated in this troubleshooting table have been performed.
1 The machine does not start
Check that:
- the plug is correctly fitted into the socket
- the door is securely closed
- the “Start-Pause” button has been pressed.
2 The tub does not fill with
water
Check that:
- the plug is correctly fitted into the socket
- the door is securely closed
- the water tap is open
- the water inlet filters are not clogged. Clean them as indicated in
paragraph 6.5.
- the water inlet tube is not jammed or bent
3 No water appears to be in
the drum
No fault.
The water level is lower than the glass of the door because the new
machines use less water though obtaining the same washing and rinsing
results.
4 The water does not drain
Check that:
- the drain hose is not twisted
-
the drain pump is not clogged. Clean it as indicated in paragraph 6.3.
5 The water does not drain
after final rinsing in
delicates and woollens
washing programmes
This is envisaged by the washing programme (if the no-spin and stop with
tub full option has been selected) to prevent fabrics from creasing.
To drain the water, proceed as described in the “End of programme”
section, paragraph 5.14.
6 The machine fills with
water and drains
continuously
Make sure the end of the drain hose is not too low.
7 Strong vibrations during
spinning
Check that:
- the machine has been properly levelled as described in paragraph
3.2
- the machine is not too close to walls or furniture
- the internal moving assembly has been released as described in
paragraph 3.1
8 Too much foam forms and
escapes from the tray
Check that:
- the detergent is suitable for automatic machines and is not for hand
washing
- no more than the quantities indicated in the manual are used
9 Water on the floor
Check that:
- the unions of the water inlet hose are not loose
- the end of the drain hose has not moved out of place.
10 Not all the fabric softener
enters the machine or too
much water remains in the
compartment
Make sure that the traps in the detergent tray are correctly positioned and
are not clogged. Clean them as indicated in paragraph 6.4.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg wmf16axs at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg wmf16axs in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info