Manual Smeg wdf 16 bax (page 19 of 27) (English)

314860

Zoom out

Zoom in

1/27

• For automatic wash+dry programmes, therefore, the drying temperature depends on which washing

programme is selected.

• The washing must have been previously washed and spun before a dry-only programme can be

performed.

• When drying particularly fluffy items such as new terry towels, the "Rinse" program should be carried out

to ensure that any deposits left by the fabric are removed, and are not deposited on the clothes in the

next wash.

Important – Do not dry fabrics that cannot withstand temperatures of 60°C or in any case fabrics that cannot

withstand the selected temperature.

6.1.1 TABLE OF APPROXIMATE DRYING TIMES AND TEMPERATURES

Weight of

washing

Resistant fabric

drying at 90°C

Delicate fabric

drying at 60°C

Drying result

1.5kg

40 minutes 70 minutes Damp for ironing

70 minutes 100 minutes Dry

2.5kg

70 minutes 120 minutes Damp for ironing

90 minutes - Dry

6.1.2 EXTRA DRYING

If the washing is still too wet when the programme finishes, set a brief timed drying cycle.

Caution!: do not dry garments too much as they may crease or shrink.

6.2 WASH-ONLY PROGRAMMES

Follow the instructions contained in chapter 5 – Washing instructions, taking care to set drying time to 0 with the

Select programme and drying time button (see chapter 4 – Description of controls, letter I).

6.3 WASH+DRY PROGRAMMES

Washing and drying programmes can be automatically performed with intensive cycles (cottons, coloureds) and

synthetics/delicates cycles. For the latter, only delicate drying is allowed (drying at 60°C, identified by the LED with

the “-” sign), while for cotton and coloured garments, both the delicate drying programme (drying at 60°C, “-”) and

the intensive drying programme (drying at 90°C, “

+”) are allowed. If a wool washing programme is selected,

automatic drying is not possible after washing.

To wash and dry automatically, a load of washing weighing no more than 2.5 kg of cotton or 1.5 kg of

synthetics should be used.

Therefore, if the load to wash and dry exceeds the above quantities, an automatic washing programme should not

be set and, at the end, the load will have to be divided in half and drying done in two steps.

To set an automatic wash+dry programme, proceed as follows:

1. Select the washing programme as shown in paragraph 5.9;

2. Select the required spin speed as shown in paragraph 5.10.1;

3. Press the select drying programmes and drying times button (

). The LED over the button lights up as

does the delicate drying times LED (“-”). The display shows the time (hours/minutes) set for the selected

drying programme. Initially, the time is equal to 0h 0’ for all programmes.

4. Press the select button ( ) repeatedly, the drying time (hours/minutes) starts from 0 hours 20 minutes

and increases by 10 minutes every time the button is pressed, up to a maximum of 2 hours. Press the

button again, the time starts again from 0h 0minutes and the LED switches from delicate drying (-

) to

intensive drying (+

) or vice-versa. Press the button again to increase by 10 minutes and so on up to 2

hours. Switching from intensive (

+) to delicate (-) drying or vice-versa can also be achieved by holding

down the button for at least 4 seconds.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Smeg wdf 16 bax in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Smeg wdf 16 bax Manual

Product: