682827
5
Zoom out
Zoom in
Previous page
1/30
Next page
5
3. SAFETY PRECAUTIONS AND INSTRUCTIONS
The precautions and instructions below contain important information and must be read with care.
The manufacturer does not accept responsibility for damage caused by failure to comply with the safety
precautions and instructions.
3.1 Correct installation
The dishwasher must be installed by an authorised technician.
When handling and installing the dishwasher, always wear the most suitable personal protection
equipment (PPE) for the task in hand.
Do not install a dishwasher which has been damaged during transport. If in doubt, consult your
dealer.
If the power supply cable is damaged, do not run the dishwasher.
Do not install the dishwasher in areas subject to freezing temperatures or in atmospheres with
explosion risk (ATEX).
Any accessories may only be installed on the appliance if authorised by the manufacturer.
Do not install the dishwasher next to appliances which irradiate strong heat (e.g. gas burners, stoves,
etc.) since they could cause damage.
If the dishwasher is installed above the ground, make sure that the stand and dishwasher are secured
properly and do not constitute a hazard.
Electrical safety is only ensured if the dishwasher is connected to an earth conductor compliant with
the relevant electrical regulations. If in doubt, have the system inspected by a qualified electrician.
A circuit breaker and overcurrent protection device (magnetothermal switch or fuses) must be
installed in an easily accessible position on the dishwasher's power supply line. This device must only
serve the dishwasher and must be suitable for its rated electrical characteristics.
Do not connect the dishwasher to the electrical mains by means of adapters or extensions, since
they do not guarantee the safety required.
If the dishwasher is connected to the electrical mains by means of a plug, it must be of the same type
as the power socket, suitable for the appliance's rated electrical characteristics and compliant with
the relevant national regulations on electrical systems. The power plug must be easily accessible
after the appliance has been installed.
Only use new hoses for connection to the water supply. Old hoses or hoses salvaged from previous
installations must not be used.
The drain connection must be made in accordance with the relevant national regulations.
Substandard connections may cause flowback and in some cases pollution.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg UG401DM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg UG401DM in the language / languages: English as an attachment in your email.

The manual is 8,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg UG401DM

Smeg UG401DM User Manual - German - 34 pages

Smeg UG401DM User Manual - Dutch - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info