682821
35
Zoom out
Zoom in
Previous page
1/41
Next page
35
ALARM ID
DESCRIPTION
USER ACTION
AF:30
During the cycle, the wash
chamber water level exceeds
the safety level. Water safety
level.
Check the machine's water supply:
1. Supply pressure.
2. Check that the connections are correct, as specified in this
manual.
User: run the DEFAULT PROCEDURE described above. If the
alarm does not reset, run the RESET PROCEDURE.
If you find any leaks: immediately close all supply taps and
contact technical service.
AF:32
Water remaining in the wash
chamber when the machine is in
stand-by.
User: run the DEFAULT PROCEDURE described above. If the
alarm does not reset, run the RESET PROCEDURE.
If you find any leaks: immediately close all supply taps and
contact technical service.
AF:33
Incorrect steam condenser
water fill. No water in the steam
condenser.
Indicates that there is no water in the steam condenser when
it is expected to be there.
Check the water supply:
1. Supply pressure.
2. Check that the connections are correct as specified in this
manual.
3. Obstructions and restrictions along the hoses.
Run the DEFAULT PROCEDURE described above. If the alarm
does not reset, run the RESET PROCEDURE.
AF:34
Steam condenser water drain
failed.
Check the drain hookup:
1. Height and position of drain fittings
2. Check that the connections are correct as specified in this
manual.
3. Obstructions and restrictions along the hoses.
User: run the DEFAULT PROCEDURE described above. If the
alarm does not reset, run the RESET PROCEDURE.
AF:54
Door opening detected during
cycle. Door interlock
microswitch fault.
1. Make sure to close the door properly before running a
wash cycle.
2. Do not force the door open during a cycle, always use the
appliance's controls to pause the cycle and open the door.
3. Make sure there are no objects jammed between the door
and the dishwasher chamber which are stopping the door
closing.
3. Run the DEFAULT PROCEDURE described above. If the
alarm does not reset, run the RESET PROCEDURE.
AF:56
Door lock fault, no automatic
open.
Make sure to close the door properly before running a wash
cycle.
Try opening the device again with the Open door button.
If necessary, use the manual door release procedure
described in this manual.
Run the DEFAULT PROCEDURE described above. If the alarm
does not reset, run the RESET PROCEDURE.
A:58
Dryer does not heat up. Only for
model SWT260X
User: run the DEFAULT PROCEDURE described above. If the
alarm does not reset, run the RESET PROCEDURE.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg SWT260XD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg SWT260XD in the language / languages: English as an attachment in your email.

The manual is 2,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg SWT260XD

Smeg SWT260XD User Manual - German - 44 pages

Smeg SWT260XD User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info