682822
16
Zoom out
Zoom in
Previous page
1/41
Next page
16
Detailed description
BUTTONS
DESCRIPTION
On/Off
This button is enabled both with the door open and closed.
It turns the interface on/off, thus allowing the dishwasher to be operated.
Brief press: shows the remaining cycle time
Hold the button down for 2 seconds to turn on or off.
Once on, the dishwasher displays the program ID (e.g. “Pr 03”).
When the interface is switched off, the display readsOFF”.
When the door is open the display shows four dashes and the other buttons are disabled.
If the dishwasher is switched off with water still in the wash chamber, “OFF” flashes; at the
end of the phase it is displayed steadily.
The dishwasher is still powered even with the interface turned off.
Auto Open open door at end of cycle
This button sets the door open function - see below for restrictions when running a heat
disinfection cycle.
It is not enabled if the prewash and service cycles are selected.
It is an alternative to the Repeat function.
There is no need to press the button for every cycle; it remains set once pressed
Dry drying (ONLY MODELS with dryer)
This button is used to set the drying function and is only active in programs which use this
option see programs table.
It is an alternative to the Repeat function.
There is no need to press the button for every cycle; it remains set once pressed
Additional prewash (where applicable)
This button is used to set an additional cold prewash at the beginning of each cycle.
There is NO need to press the button for every cycle; it remains active once pressed.
Start/Pause
Starts a new cycle or pauses the current one.
When the cycle starts or pauses, a double beep will sound. This button can also be used to
confirm a dishwasher parameter during configuration (hold down for 2 seconds).
Drain
Once a wash cycle has terminated, pressing this button drains the water, runs a regeneration
cycle (where required) and automatically turns the dishwasher off.
Confirm with the start/pause button; the display will read “UnLo” (Unload).
With automatic regeneration, “OFF” and “R” will flash until the end of the phase.
Repeat (where applicable)
Pressing this button reuses the water from the most recent rinse for the next cycle's
wash to speed up operation, in programs which have this option. This function is not
available if you have selected drying or automatic open at end of cycle.
Open door
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg SWT260X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg SWT260X in the language / languages: English as an attachment in your email.

The manual is 2,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg SWT260X

Smeg SWT260X User Manual - German - 44 pages

Smeg SWT260X User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info