126021
22
Zoom out
Zoom in
Previous page
1/25
Next page
User instructions
41
6. Troubleshooting
The dishwasher is equipped with a self-diagnostics system that is capable of detecting and
signalling a number of possible faults.
In the event of a fault or malfunction,
before calling the After-sales service centre
, we suggest
that you first consult the troubleshooting guide below.
If the problem persists even after implementing the recommended solutions, call the After-sales
service centre
after
having carried out the following:
making a note of the message displayed by the self-diagnostics system;
unplug the power cord from the socket;
shut off the water supply tap.
TABLE OF FAULTS DETECTED BY THE SELF-DIAGNOSTICS SYSTEM
FAULT DESCRIPTION
E2
The system which limits the water level inside the dishwasher (Level Safety Device) has
been tripped.
Since the cause might be a temporary failure, try reprogramming the dishwasher.
If the problem persists, call the authorised technical service centre.
E3
The dishwasher fails to heat the water.
To reset the appliance, open and close the door.
To determine the cause of this problem call the authorised technical service centre.
E4
The temperature monitoring system has failed.
Switch the dishwasher off, switch it back on and restart the washing program. If the alarm recurs,
call the After Sales Service.
E5
The dishwasher fails to draw water.
Check that:
the water supply tap is open;
the filter in the water intake hose is not clogged;
the water intake hose is not kinked or bent.
Switch the dishwasher off and back on. If the problem is resolved the washing program will resume
from where it was halted.
If the fault persists, call the authorised technical service centre.
E6
The dishwasher fails to drain.
Check that:
the flexible drain hose is not kinked or obstructed;
the water drain pipe is not obstructed;
the dishwasher filter is not clogged.
Switch the dishwasher off and back on. If the problem is resolved, the washing program will
resume from where it was halted.
Otherwise, if the fault persists, call the authorised technical service centre.
E7 / E9
The appliance is not able to "measure" the amount of water loaded (for models equipped
with this device only).
Since the cause might be a temporary failure, try reprogramming the dishwasher.
If the problem persists, call the authorised technical service centre.
E8
Alternate washing device locked out (for models with this feature only).
Open the door and close it again; if the problem persists the authorised after-sale service centre
will have to be called in.
In the event of error codes not included in this table, call the Technical Service Centre.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg stx 45 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg stx 45 3 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg stx 45 3

Smeg stx 45 3 User Manual - German - 25 pages

Smeg stx 45 3 User Manual - Dutch - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info