791146

Smeg STFABBL3 Manual

32
Zoom out
Zoom in
Previous page
1/59
Next page
User instructions
32
In order for the water softening system to give fault-free service, the appliance
performs a regeneration cycle of the system at regular intervals.
The regeneration process consists of several stages. It starts at the end of the last
rinse cycle, after the amount of water indicated in the mains water hardness setting
has been reached during the wash cycle, and finishes at the beginning of the
following wash cycle.
The regeneration process increases the cycle time and consumption of water and
electricity.
Below is an overview of consumption of regeneration the softening system using the
Eco program with a water hardness setting of H2.
Water
consumption
according to
model
[refer to the
programs
table]
(litres)
Regeneration
frequency
(number of
cycles)
Water
consumption
during
regeneration
(litres)
Energy
consumption
during
regeneration
(Wh)
Duration of the
regeneration
process
(min)
At
the
end
of
the
last
rinse
At the
beginning
of the
following
wash
cycle
At
the
end
of
the
last
rinse
At the
beginning
of the
following
wash
cycle
At
the
end
of
the
last
rinse
At the
beginning
of the
following
wash
cycle
7 8
0.2
4
(10x0.4
litres)
0.3 1.2 6 4
Each time the salt container is refilled, make sure that the cap is
securely closed. The mixture of water and detergent must never
penetrate the salt container, as this would compromise the operation
of the regeneration system. In this case warranty cover will be
forfeited.
Only use regeneration salt specifically for domestic
dishwashers. Do not use table salt, since it contains insoluble
substances that could damage the water softener system.
After having added salt, run a wash cycle to remove any excess salt.
In this way, the excess saline solution will be immediately removed
by the water; the prolonged presence of salt water inside the tank may
lead to corrosion.
Be careful not to confuse the salt and detergent packages; adding
detergent to the salt container will damage the water softening system.
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg STFABBL3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg STFABBL3 in the language / languages: English as an attachment in your email.

The manual is 9.66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info