Manual Smeg STA160 (page 7 of 26) (English)

24426

Zoom out

Zoom in

1/26

3.3 WATER SUPPLY CONNECTION

1. Check that inlet pressure lies between the following values: 50-900kPa. For higher

pressures, install a pressure reducer.

2. Connect the cold water inlet hose (light blue ring nut) to the cold water tap with a

¾ gas thread, taking care to screw it firmly into place in order to prevent leaks. The

water inlet hose must not be bent or crushed and must not be replaced or cut.

3. If a hot water inlet is used, inlet water temperature must not exceed 60°C and the

hose with the red ring nut must be connected to the hot water tap.

Attention!

• If the water pipe is new or has not been used for a long time, let a certain amount of water run before attach-

ing the inlet hose. This stops any deposits of sand and other impurities from clogging the filters used by the

machine to protect the water inlet valves.

3.4 DRAIN CONNECTION

1. Insert the end of the drain hose into a drain pipe having an internal diameter of at least 4 cm and a height

ranging between 50 and 90 cm, or attach it (using the relative curved plastic profile) to a basin or bath tub.

2. Always check that the end of the drain hose is securely attached in order to prevent the repulsive force of

the water from moving it out of position.

Attention!

• Do not bend or obstruct the hose as this will reduce the flow of water.

• Any extensions to the drain hose must not exceed 1 metre, they must have the same internal diameter and

must not be obstructed in any way.

• In no case may the end of the drain hose be submerged in water.

3.5 ELECTRICAL CONNECTION

Before fitting the plug into the socket, make sure that:

1. Input voltage matches that indicated on the name plate attached to the inner edge of the door.

2. The contactor, pressure relief valves, power line and socket are capable of withstanding the maximum

rated power input indicated on the name plate.

3. The socket is compatible with the plug supplied with the machine without the need to fit multiple sockets,

adaptors or extension leads that could cause overheating or burning.

4. If the socket does not correspond to the supplied plug, replace the socket with one of a suitable type.

Attention

• The plug must be accessible after installation.

• The appliance must be earthed. Plug the machine into a socket fitted with an efficient earth connection.

The manufacturer declines all responsibility for damage to persons or property resulting from

failure to earth the appliance or from a defective earth connection. Correct electrical connec-

tions guarantee maximum safety.

• This appliance complies with EEC directive 89/336 of 3.5.89 (modified by EEC directive 92/31) relative to the

elimination of radio interference.

• If the power cord is damaged, only replace it with an original spare part available from our service depart-

ment.

• Do not insert/remove the plug from the socket if your hands are wet.

• Remove the plug from the socket by gripping the plug and not the cord.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Smeg STA160 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg STA160

Smeg STA160 User Manual - German - 27 pages

Smeg STA160 User Manual - Dutch - 25 pages

Smeg STA160 User Manual - French - 26 pages

Smeg STA160 User Manual - Spanish - 26 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Smeg STA160 Manual

Product: