Manual Smeg STA120 (page 14 of 21) (English)

24420

Zoom out

Zoom in

1/21

To switch on the machine and select programmes, proceed as follows:

1. Turn the programme knob in either direction. The machine switches on and the “Start” programme phase

LED lights up.

2. Select the washing temperature, within the sectors marked on the front panel by the following words:

• Cottons, coloureds

• Woollens

• Synthetics, delicates

Attention!

• The following partial washing programmes can be set using the programmes knob:

-Rinse with additive

-Drain and spin

-Fabric softener

These partial programmes are inside the Cotton, Synthetics and Wool sectors, except for the drain and spin

programme (Drain

• If the indicated temperature shows 0°, this means that the programme performs a cold wash cycle. The same

cold wash is also performed by the Hand wash programme in the Wool sector.

• The fabric treatment labels show which washing temperature must be set.

• If various garments in the same load require different washing temperatures, choose the lowest wash-

ing temperature of all.

• If the laundry is only slightly dirty and does not need the bleaching effect of high temperatures, a lower tem-

perature can be chosen to save power. In spite of the low temperature and consequent saving of electric-

ity, an automatic time control keeps the duration of the main washing unvaried compared with that of a high

temperature programme. It is therefore possible to successfully wash normally dirty laundry at lower wash-

ing temperatures than the maximum temperatures shown on the fabric care labels.

5.10 SPEED SELECTION

The models described in this instructions manual may either feature fixed or variable spin speeds. Models with

fixed spin speeds cannot be adjusted but can disable the spin cycle (

) if the model features this option.

Other models are fitted with a button for selecting spin speed (see chapter 4 – Description of controls) which al-

lows one of three speed levels to be selected.

Press the button identified with the letter “H” in chapter 4 – Description of controls, the 3 LED's located over the

button light up in sequence to indicate (from top to bottom):

• maximum spin speed

• intermediate spin speed

• final spin disabled and stop with tub full ( ): if this option is selected, the final spin is not per-

formed at the end of the washing programme and the machine stops with the tub full of water and the

washing soaked. To remove the soaked and dripping washing (drip-dry fabrics) turn the knob to “Drain

” and press the “Start/Pause” button. The water is automatically drained on all programmes without

spinning. If you wish to drain the water in the tub and then spin, turn the knob to “Drain

”, select one

of the two available speeds (maximum or intermediate) with the select button and press the “Start-

Pause” button. These methods are also valid for fixed speed machines featuring the spin disable op-

tion.

With programmes in the Cottons/Coloureds sector, fabrics can be spun up to the maximum speed envisaged for

the model. For Synthetics/Delicates and Woollens, spin speed cannot exceed 900 rpm.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Smeg STA120 in the language / languages: English as an attachment in your email.

The manual is 0,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg STA120

Smeg STA120 User Manual - Dutch - 24 pages

Smeg STA120 User Manual - French - 22 pages

Smeg STA120 User Manual - Italian - 23 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Smeg STA120 Manual

Product: