660416
15
Zoom out
Zoom in
Previous page
1/22
Next page
Instructions for the installer
17
8. GAS CONNECTION
If the appliance is installed on an oven, you must avoid running the gas tube
round the back of the oven in order to avoid overheating.
Connection to the gas supply network can be made using a rigid copper hose
or a flexible steel hose with a continuous wall and in compliance with the
guidelines established by the applicable standard.
To facilitate the connection, connector A on the back of the appliance can be
orientated laterally; loosen hexagonal nut B, twist connector A into the desired
position then retighten hexagonal nut B (it is sealed with a rubber gasket). Once
the operation is complete, check the hose fittings for leaks using a soapy
solution; never use a flame.
The cooker hob is preset for natural gas G20 (2H) - G20/G25 (2E+)
at a pressure of 20 mbar - 20/25 mbar . For supplying it with
other types of gas, see chapter "9. ADAPTATION TO DIFFERENT TYPES OF
GAS". The gas inlet connection is threaded ½” external gas ISO 7-1 / ISO
228-1 .
Connection with a rigid copper hose: The
connection to the gas supply network must be made
in such a way that it does not cause stresses of any
type on the appliance.
The connection can be made using the adapter unit
D with double cone, always inserting gasket C
(provided) in between.
Connection with a flexible steel hose: use only
continuous wall stainless steel hoses that comply
with the applicable standards, making sure to always
insert gasket C (provided) between connector A and
flexible hose E.
Installation with flexible hose must be carried out so that the length of the piping
does not exceed 2 metres when fully extended; make sure that the hoses do not
come into contact with moving parts and that they are not crushed in any way.
BE
BE
BE
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg SR975NGHD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg SR975NGHD in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg SR975NGHD

Smeg SR975NGHD User Manual - German - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info