660409
17
Zoom out
Zoom in
Previous page
1/22
Next page
Instructions for the installer
19
9. ADAPTATION TO DIFFERENT TYPES OF GAS
Before carrying out the following operations, disconnect the appliance from the
power supply.
The cooker hob is preset for natural gas G20 (2H) - G20/25 (2E+) at a
pressure of 20 mbar - 20/25 mbar . If other types of gas are to be
used, the nozzles must be replaced and the primary air must be adjusted.
In order to replace the nozzles and adjust the burners, the hob top must be
removed as described below.
9.1 Removing the hob top
1 Remove all the knobs, pan stands, the caps and the flame-spreader crowns;
2 remove the screws and the nuts A that secure the burner supports;
3 lift the hob top from its housing;
4 replace the burner nozzles in accordance with the reference gas chart;
5 adjust the primary air as described in “9.5 Primary air adjustment”.
BE
BE
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg SR775BSD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg SR775BSD in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg SR775BSD

Smeg SR775BSD User Manual - German - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info