792005

Smeg SOP6900TN Manual

18
Zoom out
Zoom in
Previous page
1/25
Next page
CLEANING AND MAINTENANCE - 4791477A143/B
e
• Remove any food residues or large spills
from previous cooking operations from the
inside of the oven.
• Completely remove all accessories from
inside the oven.
• For very stubborn encrustations spray an
oven cleaning product onto the glass (read
the warnings on the product); leave for 60
minutes, then rinse and dry the glass using
kitchen roll or a microfibre cloth.
• If present, remove the temperature probe.
• Remove the rack/tray support frames.
• Close the door.
Pyrolytic function setting
1. Turn the function knob to the position .
The display shows the text
alternated with the Pyrolytic cycle
duration (factory set to 2 hours and 30 minutes).
2. Use the increase and decrease
keys to set the Pyrolytic cycle duration.
3. Press the clock key to confirm the data
entered.
After a few seconds, the preheating of the
Pyrolytic cycle starts:
• the symbol on the display and the
Pyrolytic cycle indicator light switch on;
• the display shows the time left until the end
of the entire cleaning process ;
• the symbol on the display flashes.
A few minutes after the preheating starts, the
symbol comes on (steadily lit) to indicate that the
door is locked by a device that prevents the
door from being opened.
Cleaning process
At the end of preheating, the Pyrolytic cycle
starts automatically:
• the thermostat indicator light turns off (turning
on and off regularly indicates that the
temperature inside the oven cavity is being
kept constant);
• on the display, the symbol comes on
(steadily lit) to indicate that the Pyrolytic
cycle is in progress;
• The Pyrolytic cycle indicator light and the
and symbols on the display remain
lit.
End of Pyrolytic function
At the end of the Pyrolytic function:
• the heating elements are deactivated;
• the flashing text appears on
the display;
• a buzzer sounds, which can be switched off
by pressing any key on the display;
• the symbol and the thermostat indicator
light switch off.
1. Turn the function knob to position 0 to exit
the function.
The symbol on the display remains lit until
the temperature inside the oven cavity returns to
safe levels (with the consequent deactivation of
the door lock).
2. Wait for the oven cavity to cool down.
3. After the symbol switches off, open the
door and collect the residue deposited
Recommended pyrolytic cycle duration:
• Light dirt: 2:00
• Medium dirt: 2:30
• Heavy dirt: 3:00
It is not possible to select any function
once the door lock device has been
activated.
If the function knob is turned to another
function, the display shows an error
message .
During the first Pyrolytic cycle,
unpleasant odours may occur due to
the normal evaporation of oily
manufacturing substances. This is an
absolutely normal phenomenon which
disappears after the first pyrolytic cycle.
During the Pyrolytic cycle the fans
produce a more intense level of noise
due to a greater rotation speed. This is
an absolutely normal operation,
intended to provide more effective heat
dispersal. At the end of the pyrolytic
cycle, the fans will continue to operate
for long enough to avoid overheating
the walls of adjacent units and the front
of the oven.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg SOP6900TN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg SOP6900TN in the language / languages: English as an attachment in your email.

The manual is 0.93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg SOP6900TN

Smeg SOP6900TN User Manual - German - 28 pages

Smeg SOP6900TN User Manual - French - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info