791983
44
Zoom out
Zoom in
Previous page
1/55
Next page
102 - CLEANING AND MAINTENANCE 914779938/B
If present, remove the temperature probe.
Remove the rack/tray support frames.
Close the door.
Pyrolytic function setting
1. Touch the OTHER FUNCTIONS
button on the "main menu" (in the main area
).
2. Select PYROLYTIC function .
The display shows the Pyrolytic function duration
(factory set to 2:00 hours).
3. Scroll with your finger to set the duration of
the Pyrolytic function from a minimum of
2:00 hours to maximum 3:00 hours.
4. Press the CONFIRM button to confirm
the selected duration.
The display shows the warning to remove all
accessories from the oven cavity before starting
the function.
On the right of the icon both the selected
duration for pyrolytic function (top) and the
expected end time of the function (bottom) are
displayed.
5. Press the START button to start the
pyrolytic function.
Approximately 1 minute after the Pyrolytic
function starts, the indicator light (in the
lower area ) comes on to indicate that the
door is locked by a device that prevents the
door from being opened.
At the end of the function, the appliance beeps
and the display returns to the main menu.
Programmed pyrolytic function
It is possible to program the Pyrolytic cycle start
time like all other cooking functions.
1. After confirming the desired pyrolytic
function duration, touch next to the expected
end time of the function.
2. Scroll with your finger to select a different
time for the pyrolytic function to finish.
3. Press the CONFIRM button to confirm.
The appliance waits until the set start time to start
the Pyrolytic function, showing the relevant
countdown.
End of Pyrolytic function
When the temperature inside the oven cavity
has fallen to safe levels and the door lock has
been deactivated, open the door and collect
the residues inside the oven cavity with a damp
Available pyrolytic function durations:
Light dirt: 2:00
Medium dirt: 2:30
Heavy dirt: 3:00
It is not possible to start the pyrolytic
function if the temperature probe (if
available) is plugged in and the icon
flashes.
It is not possible to select any function
once the door lock device has been
activated.
The door is locked until the temperature
inside the oven cavity returns to a safe
level.
During the Pyrolytic cycle the fans
produce a more intense level of noise
due to a greater rotation speed. This is
an absolutely normal operation,
intended to provide more effective heat
dispersal. At the end of the pyrolytic
cycle, the fans will continue to operate
for long enough to avoid overheating
the walls of adjacent units and the front
of the oven.
During the first Pyrolytic cycle,
unpleasant odours may occur due to
the normal evaporation of oily
manufacturing substances. This is an
absolutely normal phenomenon which
disappears after the first pyrolytic cycle.
If the pyrolytic cycle gives unsatisfactory
results at minimum duration, it is
recommended to set a longer time for
subsequent cleaning cycles.
It is not possible to select any function
once the door lock device has been
activated. It is still possible, however, to
switch off the appliance pressing the
ON-OFF button.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg SOP6606S2PNR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg SOP6606S2PNR in the language / languages: English as an attachment in your email.

The manual is 2.2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg SOP6606S2PNR

Smeg SOP6606S2PNR User Manual - German - 59 pages

Smeg SOP6606S2PNR User Manual - French - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info