791162
49
Zoom out
Zoom in
Previous page
1/66
Next page
USE - 12191477A081/B
e
14.Touch the CONFIRM button to confirm
that you have finished filling the reservoir.
Manual reservoir draining
1. Touch the OTHER FUNCTIONS
button on the "main menu" (in the main area
).
2. Touch the sub-menu button (located in
the lower area ).
3. Touch the RESERVOIR DRAIN
button.
4. Place a jug or container on the open door.
5. Remove the loading wand from its holder.
6. Press the START button to start draining
the water into the jug (or container).
When complete, the display will indicate that
the residual water removal process is complete.
7. Touch the CONFIRM button.
8. Shake the loading wand in order to remove
any remaining water.
9. Place the loading wand back in its holder.
10.Remove the jug (or container).
11.Close the door.
For the cleaning function VAPOR CLEAN
(only on some models) and the cleaning
functions of the sub-menu , see the chapter
CLEANING AND MAINTENANCE.
In the event of a blackout
Following a power failure during a function, the
appliance automatically resumes the function it
was performing, maintaining all the previous
settings and discounting the time already
elapsed of the function only if:
the duration of the power failure is less than
or equal to 60 seconds;
the function does not include the use of
microwaves (depending on the model);
the pyrolytic function is in progress
(depending on the model);
the Sabbath function is in progress
(regardless of power failure time).
If the power failure occurs in a condition other
than those described above, the appliance
remains waiting for manual consent to continue
or not the function from the user for a certain
time.
If the function is reactivated, the cooking settings
remain as they were before the blackout, taking
into account the time already elapsed.
If there is no intervention by the user, the
appliance cancels the function and the display
shows the current time again.
Blackout during a programmed function
If the power failure occurs while a programmed
cooking process is set:
If the blackout is restored within the set start
time, the appliance remains in standby
mode updating the time until start.
If the blackout is restored after the set start
time, the device waits for the function to start
and, if after a certain time there is no
intervention by the user, the appliance
cancels the function and the display shows
again the current time.
Settings
The product configuration can be set using this
menu.
Touch the SETTINGS button on the
main menu (at the right in the lower area
).
Function for draining water (or other
liquids) from the reservoir.
(SmegConnect models only) A
notification also appears in the app
when you reconnect.
In the event of a temporary power cut,
all personal settings will remain stored.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg SO6303 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg SO6303 in the language / languages: English as an attachment in your email.

The manual is 2.84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info