791986
15
Zoom out
Zoom in
Previous page
1/46
Next page
64 - USE 91477A213/B
RAPID PRE-HEATING
PROBE (on some models only)
Connectivity (on some models only)
Connectivity requirements:
Smartphone or PC tablet with IOS or
Android operating system. The minimum
versions of the operating systems are
available at the following link:
www.smeg.com/smegconnect/
Wi-Fi network (2.4 GHz band, WPA2
protected) active and available in the
place where the appliance is installed.
Internet connection.
Name and password of the home Wi-Fi
network or WPS (Wi-Fi Protected Setup)
mode available.
For further information, please refer to the
"Built-in oven connectivity" manual.
First use
To switch on the appliance:
1. Connect the appliance to the mains power
supply.
The manufacturer’s logo will display for a few
seconds.
The display then shows the current time setting
screen.
To be able to start any cooking function, the
current time must be set.
2. Scroll up and down through the hours and
minutes to set the current time.
3. Touch the CONFIRM button (at the
right in the lower area ) to set the
current time.
The first time you use the appliance, it may be
set to a language other than the one you speak.
It is recommended that you set the required
language at this point.
4. Touch the SETTINGS button on the
display (at the right in the lower area ).
5. Touch the display button .
6. In the Language option (on the left),
scroll through the available languages (on
the right) to select the required language.
7. Touch the CONFIRM button.
Deactivating the display
To deactivate the display manually:
Press and hold the ON-OFF
button for a few seconds until you hear a
Press and hold the HOME button
or the ON-OFF button for a few
seconds to stop cooking immediately at
any time and return to the main menu.
The following instructions are also valid
in the case of a prolonged power
failure.
After the appliance is switched on, you
will need to wait a few seconds before
you can use it.
To change the current time (e.g. due to
daylight saving time) touch the time
shown on the display (in the information
area on the right).
When the current time is visible, after 2
minutes from the last operation by the
user it is displayed with low brightness.
When the " Show the time" mode is
set to Off, if the time display is shown,
the display will switch off automatically
after 2 minutes.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg SO4604M2PNR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg SO4604M2PNR in the language / languages: English as an attachment in your email.

The manual is 1.83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg SO4604M2PNR

Smeg SO4604M2PNR User Manual - Dutch - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info