660471
5
Zoom out
Zoom in
Previous page
1/19
Next page
Instructions
23
EN
1.4 General safety instructions
• Do not plug in or unplug with wet hands.
This may cause electric shock or injury.
• Plug the power cord correctly and push it
tight in a wall socket. This may cause
electric shock or fire.
• If the supply cord is damaged, it must be
replaced by the manufacturer, its service
or similarly qualified persons in order to
avoid a hazard. If the power cord is
damaged, it may cause electric shock or
fire.
• Never alter the appliance. Also, do not
disassemble or repair by yourself.
Do not insert fingers, foreign substances
or objects such as pins into gaps or holes
in the body. This may cause a fire,
electric shock or failure. For any
technical support, contact the authorised
local Customer Care Centre.
• In case the power cord breaks or is
damaged or the plug-in part becomes
loose, do not operate it. This may cause
electric shock, fire or injury.
• Do not moisten the body or splash water
on the body. Be careful not to let any
liquids or other substances get into the
switch on the appliance. Do not operate
the switch with wet hands. It may cause
electric shock or fire.
• For your safety, have the grounding
connection perfomed. Make sure that
the grounding is not done on gas pipes,
plastic water pipes, telephone wires, etc.
This may cause electric shock, fire,
malfunction or explosion. Be sure to use
the electrical outlet with ground
connection.
• Never disassemble the chamber set
during operation or insert fingers, foreign
objects such as forks, spoons, etc. into
the hopper chute or juice outlet. This may
cause injuries, accidents or failure.
• Do not operate without locking the
hopper properly. It may cause injury or
failure.
• When detecting a gas leak, do not insert
the power cord into its slot. Open the
window immediately to ventilate fully.
This may cause injury or failure.
• Never put fingers, forks or spoons, etc.
into the juice outlet. This may cause injury
or failure.
• If rotation of the auger is stopped in
normal operation, activate the REVERSE
function and hold for 2-3 seconds and
then after the REVERSE function has
stopped completely, press the ON
button again. If the auger keeps stopping
during operation, the parts may get
damaged and performance may be
affected due to the motor overheating. If
the problem persists, stop the appliance
immediately and contact your local
Customer Care Centre.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg SJF01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg SJF01 in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg SJF01

Smeg SJF01 User Manual - German - 19 pages

Smeg SJF01 User Manual - Dutch - 19 pages

Smeg SJF01 User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info