626467
11
Zoom out
Zoom in
Previous page
1/15
Next page
EN21
IMPORTANT: do not use abrasive sponges or pan scourers. as they could ruin the glass surface.
Clean the hob, when it is cool, after each use in order to remove any food residues.
Sugar and foods with a high sugar content damage the glass ceramic surface and must be immediately removed.
Salt, sugar and sand can scratch the glass surface.
Use a soft cloth, absorbent kitchen wipes or a specific hob cleaner (follow the Manufacturer’s instructions).
Read and follow the instructions given in the section “Instructions for use”.
Check that the electricity supply has not been shut off.
Clean the hob and dry it thoroughly.
If, when the hob is switched on, alphanumeric codes appear on the display, consult the following table for instructions.
If you are unable to turn the hob off after using it, disconnect it from the power supply.
Before contacting After-sales Service
1. See if you can solve the problem yourself with the help of the suggestions given in the “Troubleshooting guide”.
2. Switch the appliance off and then on again it to see if the problem has been eliminated.
If after the above checks the fault persists, contact the nearest After-sales Service.
Spare parts are available for 10 years.
CLEANING
WARNING
- Never use steam cleaners.
- Before cleaning, make sure the cooking zones are switched off and that the residual heat indicator (“H”)
is not displayed.
TROUBLESHOOTING GUIDE
ERROR CODE DESCRIPTION POSSIBLE CAUSES REMEDY
The hob switches off and after 10 seconds
emits an acoustic signal every 30 seconds.
Continuous pressure on control panel
area.
Water or utensils on control panel. Clean the control panel.
C81, C82, C83
The control panel switches off because of
excessively high temperatures.
The internal temperature of electronic
parts is too high.
Wait for the hob to cool down before
using it again.
F42 or F43
The connection voltage is wrong. The sensor detects a discrepancy between
the appliance voltage and that of the
mains supply.
Disconnect the hob from the mains
and check the electrical connection.
F12, F21, F25, F36, F37, F40, F47, F56, F58,
F60, F61, F62, F63, F64
Call the After-sales Service and specify the error code.
AFTER-SALES SERVICE
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg SIM581B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg SIM581B in the language / languages: English as an attachment in your email.

The manual is 3,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg SIM581B

Smeg SIM581B User Manual - German - 13 pages

Smeg SIM581B User Manual - Dutch - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info