660443
9
Zoom out
Zoom in
Previous page
1/15
Next page
EN9
Connect to terminal Block
For the electrical connection a power cord ( 5x2,5 mm ) is present in the supply. To connect to the terminal block, follow the instuction below:
Secure the power cable with the cable clamp.
Remove the terminal cover (A) by unscrewing the screw and insert the cover into the hinge (B) of the terminal.
Close the cover (C) and screw on the terminal with the screw removed.
Connect to wall side
ELECTRICAL CONNECTION
WARNING
- Disconnect the appliance from the power supply.
- Installation must be carried out by qualified personnel who know the current safety and
installation regulations.
- The manufacturer declines all liability for injury to persons or animals and for damage to property resulting from failure to observe the regulations
provided in this chapter.
- The power cable must be long enough to allow the hob to be removed from the worktop.
- Make sure the voltage specified on the dataplate located on the bottom of the appliance is the same as that of the home.
Remove shunts from terminal block
Before power cord connection remove the two shunts as per picture
Connecting to the terminal block
For 220-240V 1N use the cord paired as supplied. For 380-415V 3N or 380-415V 2N, separate with the scissors the wires as showed in the image below and
connect them
L1=R BLACK    L2=S BROWN   =E YELLOW-GREEN
N1=N BLUE     N2=N GREY with blue film
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg SIM562FX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg SIM562FX in the language / languages: English as an attachment in your email.

The manual is 2,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg SIM562FX

Smeg SIM562FX User Manual - German - 9 pages

Smeg SIM562FX User Manual - Dutch - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info