626366
8
Zoom out
Zoom in
Previous page
1/24
Next page
34
Instructions for the user
4.3 Cookware suitable for use in induction cooking
The containers used on the induction cooking surface must be made of metal, with magnetic properties
and a sufficiently large base.
Use only cookware with bases suitable for induction hot plates.
Suitable containers Unsuitable containers
Enamelled steel cookware with thick bases.
Cast iron cookware with an enamelled base.
Cookware in multilayer stainless steel, ferritic
stainless steel and aluminium with a special
base.
Copper, stainless steel, aluminium, fireproof
glass, wood, ceramic and terracotta cookware.
To see whether the pan is suitable, bring a magnet close to the bottom: if it is
attracted, the pan is suitable for induction cooking. If you do not have a magnet, you
can put a small amount of water in the pan, place it on a cooking zone and start the
hot plate. If the symbol appears on the display, it means the pan is not suitable.
Use only cookware with a perfectly flat bottom. Using cookware with an irregular bottom could
jeopardise the efficiency of the heating system so that cookware is not detected on the hot plate.
4.4 Limiting the cooking duration
The hob has an automatic device which limits the duration of use.
If the cooking zone settings are not changed, the maximum duration of operation of each zone depends
on the power level selected.
When the device for limiting the duration of use is activated, the cooking zone turns off, a short alert is
sounded and if the zone is hot the symbol will show on the display.
However, the automatic switch-off function takes precedence over the limitation device; the cooking
zone only turns off after the time set for automatic switch-off has elapsed.
Set power level
Maximum cooking
duration in hours
1-2 8
3-4 6
5-6 5
7 3
8 2
9
4.5 Protection from hob overheating
If the hob is used on full power for a long period, the electronics will have trouble cooling down if the
room temperature is high.
To avoid excessively high temperatures forming in the electronics, the power to the cooking zone is
reduced automatically.
If, during normal use of the hob in normal room temperatures, the code E2 appears frequently, this
means that cooling is probably insufficient. This may be caused by insufficient cooling slots or the lack of
appropriate screening. If necessary, check the installation.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg SI3842B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg SI3842B in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg SI3842B

Smeg SI3842B User Manual - German - 24 pages

Smeg SI3842B User Manual - Dutch - 24 pages

Smeg SI3842B User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info