791939
34
Zoom out
Zoom in
Previous page
1/41
Next page
80 - CLEANING AND MAINTENANCE 914779647/A
The rack/tray support frames.
Drying
Cooking food generates moisture inside the
appliance. This is a normal phenomenon and
does not affect the appliance’s operation in any
way.
Each time you finish cooking:
1. Let the appliance cool down.
2. Remove any dirt from inside the appliance.
3. Dry the interior of the appliance with a soft
cloth.
4. Leave the door open until the inside of the
appliance has dried completely.
Removing racks/trays support frames
Removing the rack/tray support frames enables
the sides to be cleaned more easily.
To remove the rack/tray support frames:
Pull the frame towards the inside of the oven
cavity to unhook it from its groove A, then
slide it out of the seats B at the back.
When cleaning is complete, repeat the
above procedures to put the rack/tray
support frames back in.
Pyrolytic (on some models only)
Preliminary operations
Before starting the pyrolytic cycle:
Clean the internal glass pane following the
usual cleaning instructions.
Remove any food residues or large spills
from previous cooking operations from the
inside of the oven.
Completely remove all accessories from
inside the oven.
For very stubborn encrustations spray an
oven cleaning product onto the glass (read
the warnings on the product); leave for 60
minutes, then rinse and dry the glass using
kitchen roll or a microfibre cloth.
If present, remove the temperature probe.
Remove the rack/tray support frames.
Close the door.
Pyrolytic function setting
1. Touch the OTHER FUNCTIONS
button on the “main menu”.
2. Scroll through the menu towards the left and
select the PYROLYTIC function.
3. Select the most appropriate setting for the
automatic cleaning of the oven cavity:
4. Touch the CONFIRM button to confirm
the setting.
The appliance is ready to start the automatic
cleaning cycle.
In the event you are using specific
cleaning products, we recommend
running the oven at maximum
temperature for 15-20 minutes in order
to eliminate any residue.
See General safety instructions.
Pyrolytic cleaning is an automatic high-
temperature cleaning procedure which
causes dirt to dissolve. This process
makes it possible to clean the inside of
the oven very easily.
Recommended pyrolytic cycle duration:
Light dirt: 2:00
Moderately dirty: 2:30
Heavy dirt: 3:00
The PROGRAMMED COOKING
button can be used to set a
function delayed end time.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg SFPR9606TPNR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg SFPR9606TPNR in the language / languages: English as an attachment in your email.

The manual is 1.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg SFPR9606TPNR

Smeg SFPR9606TPNR User Manual - French - 43 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info