712819
33
Zoom out
Zoom in
Previous page
1/40
Next page
Installation
75
EN
14. Replace the nozzle using a 7 mm
socket wrench.
15. Install the most suitable one for the type
of gas used.
16. After having replaced the nozzle, put
the burner back in its seat.
17. Tighten the burner fastening screws.
Adjusting the oven burner minimum
setting
The oven thermostat is equipped with a
screw for adjusting the minimum. When
changing the type of gas supply, the
minimum must be adjusted as follows:
1. Light the oven burner and keep it at
maximum for 10-15 minutes with the
door closed and without the shelf
installed. Then turn the knob to the
minimum temperature.
2. Slide off the knob and insert a straight
edge screwdriver to make the
adjustment.
3. If using liquid gas the adjustment screw
must be tightened clockwise to the very
end.
4. When natural gas is used, tighten
clockwise the adjustment screw until its
end of stroke, then untighten it
anticlockwise by half turn (1/2).
The tightening torque of the nozzle
must be 4 Nm.
Take care not to damage the
thermocouple or the igniter when
doing this.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg SF9300GVX1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg SF9300GVX1 in the language / languages: English as an attachment in your email.

The manual is 1,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info