712818
32
Zoom out
Zoom in
Previous page
1/40
Next page
Installation
74
5. Lift the burner at the side and pull it
towards you to remove it from its seat.
6. Replace the nozzle using a 7 mm socket
wrench.
7. Install the most suitable one for the type
of gas used.
8. After having replaced the nozzle, put the
burner back in its seat.
9. Tighten the burner fastening screws.
10. Replace the shelf in its seat.
Replacing the gas grill burner nozzle (on
some models only)
11. Open the oven door and remove all of
the accessories from inside the oven.
12. Remove the gas grill burner fastening
screws from the back of the oven cavity.
13. Slide the burner outwards until the
nozzle is accessible.
Take care not to damage the
thermocouple or the igniter when
doing this.
The tightening torque of the nozzle
must be 4 Nm.
Take care not to damage the
thermocouple or the igniter when
doing this.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg SF9300GGVX1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg SF9300GGVX1 in the language / languages: English as an attachment in your email.

The manual is 1,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info