332107
7
Zoom out
Zoom in
Previous page
1/17
Next page
Operation
GB
23
Operating the buttons
The controls described here expect the pressing of a (selection) button
to be
followed
by the pressing of a subsequent button.
The next button will need to be pressed
within 10 seconds
, otherwise the
selection will be deleted.
The plus/minus buttons can be touched individually or be permanently
pressed.
Switching on the hob and cooking zones
1. Press the
on/off button
until the power setting displays indicate 0. A
short signal will sound. The controls are ready for operation.
2. Immediately use the
plus button
or the
minus button
to select a
cooking level. The plus button will activate power setting 1 and the minus
button power setting 12.
3. Place a
metal cooking pot
onto the cooking zone. The pan recognition
device will activate the induction coil.
As long as no metal cooking pot is placed onto the cooking zone, the
display will alternate between the power level set and the symbol . If
no pot is placed on the cooking zone it will switch off after 10 minutes for
reasons of safety. Please refer to the Section on “pan recognition”.
Switching off a cooking zone
4. a) Press the
minus button
several times until the power setting
display shows 0, or
b) Press the
minus button
and the
plus button
once at the same
time. The cooking zone is switched off direct irrespective of the power
setting or
c) Press the
on/off button
. The entire hob will be switched off (all of
the cooking zones are switched off).
Switching off the hob
5. Press the
on/off button
. The hob will be completely switched off,
irrespective of any settings.
STOP function
The cooking process can be briefly interrupted with the STOP function, e.g. if
the doorbell rings. The STOP function must be released in order to continue
cooking at the same power level. If a timer has been set it will pause and will
then continue.
This function is only available for 10 minutes for reasons of safety. The hob
will then be switched off.
1. Pots and pans are on the cooking zones and the required power levels
have been set.
2. Press the
STOP button
. The letters S-T-O-P will be shown one after
another instead of the cooking levels previously selected.
3. The interruption is ended by firstly pressing the
STOP button
and
then pressing any
other button
(except the on/off button).
The second button must be pressed within 10 seconds as the hob will
otherwise be switched off.
Suitable for induction cooking
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg se2320id at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg se2320id in the language / languages: English as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg se2320id

Smeg se2320id User Manual - German - 17 pages

Smeg se2320id User Manual - Dutch - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info