336418
7
Zoom out
Zoom in
Previous page
1/14
Next page
Instructions for the user
23
5.3 Switching on the cooking zone
Press the button for the cooking zone you want to use (for example
for the front right-hand zone).
On the power display,0 appears. Pressing the keys
and you can set the power from 1 to 9.
Once you have set the hotplate's power level, this will not be activated until a pan suitable for
induction cooking is placed upon it. See paragraph 5.2 Cookware
On the hotplates with keys , the power level reaches 15.
If after having activating the hotplate, no power value is selected, the hotplate is automatically
deactivated.
5.3.1 Preselection levels (on some models only)
The keys , present only on some models, allow preset power levels for that hotplate to be
activated.
Key : cooking level 7;
Key
: cooking level 11;
Key
: cooking level 15;
5.3.2 POWER button (only on some models)
The key , present only on some models, permits supplementary power to be activated.
When it is pressed, the hotplate's power display will show
to indicate that the POWER function is
active on that hotplate. If the key
is pressed, a power setting of 15 will be set.
5.3.3 Switching off the hotplate
Any hotplate can be switched off (the figure shows the front right-hand zone) at any time by pressing
the ON/OFF key. The set power level will disappear from the display and if the hotplate remains hot
even after it has been switched off, a
begins to flash. On this regard, please refer to paragraph
5.3.5 Residual heat”.
5.3.4 Automatic hotplate switch-off (on some models only)
By means of this function, present on some models only, it is possible to program the switching off of
the hotplate after a variable operating time: from 1 to 99 minutes.
1. Select the desired power level at which to use the hotplate;
2. Using the keys
and the cooking duration can be set.
At the end of the time the hotplate will be deactivated and a buzzer will sound temporarily.
To interrupt the signal before time, press any button for the cooking plate used.
5.3.5 Residual heat
Each cooking zone is equipped with a residual heat warning device. After any zone is switched off, a
flashing “
”may appear on the display. This warns that the cooking zone concerned is still very hot.
Cooking can be restarted while the
is flashing: in this case, proceed as described in paragraph “3”.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg se2320 id1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg se2320 id1 in the language / languages: English as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg se2320 id1

Smeg se2320 id1 User Manual - German - 14 pages

Smeg se2320 id1 User Manual - Dutch - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info