336490
14
Zoom out
Zoom in
Previous page
1/25
Next page
Instructions for the User
41
8.3 Switching on the hob and the cooking zone
To activate the control described here, after pressing one (selection) button, you need to press another
one afterwards.
The second button needs to be pressed within 10 seconds, as otherwise the desired selection will be
deactivated.
1Press the on/off button until the power level indicators show "0". The function lights will flash. The
control is then ready for use.
2 Then press a button to select the cooking zone (e.g. for the rear left zone). The function light for
the selected cooking zone will come on.
3 Select the cooking level using the
button (
selection/increase
) or
(decrease). By selecting the
button, cooking level 1 is activated; by selecting the button, level 9 is activated.
4Place a metal saucepan on the cooking zone. Saucepan recognition will activate the induction coil.
No power is transmitted to the cooking zone until a metal saucepan is placed on it.
To cook on other cooking zones at the same time, repeat the steps in points 2 to 4.
When applying radiant heat, the cooking utensils must not have magnetic properties (proceed as
detailed in points 2 and 3).
8.4 Switching off the cooking zone
5 The function light for the selected cooking zone must be lit. If necessary, activate the cooking zone
selector.
6 a) Press the button until cooking level "0" is shown, or:
b) Press the and buttons at the same time. The cooking zone can be switched off regardless of
the power level setting, or:
c) Select the on/off button . The entire hob/all the cooking zones will turn off.
8.5 Switching off the hob
7Press the on/off button . The hob will be completely deactivated regardless of the active settings.
8.6 STOP function
The cooking process can be paused briefly using the STOP function (e.g. to go and answer the
telephone). To reinitiate the cooking process at the same power level, you need to deactivate the STOP
function. If the timer was set, it stops and then restarts from the point where it stopped.
For safety reasons, this function is only available for 10 minutes, after which the hob turns off.
1. The cooking utensils are on the cooking zone and the desired power levels have been set.
2. Press the STOP button . The symbol is displayed instead of the selected power level.
3. The function is deactivated first of all by pressing the STOP button then another button of your
choice (apart from the on/off button). The second button must be pressed within 10 seconds as
otherwise the hob will turn off.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg se 640 id 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg se 640 id 1 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg se 640 id 1

Smeg se 640 id 1 User Manual - German - 25 pages

Smeg se 640 id 1 User Manual - Dutch - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info