335588
13
Zoom out
Zoom in
Previous page
1/14
Next page
26
Instructions for assembly
GB
Electrical connection
• The electrical connection must be carried out by a
qualified electrician who is authorised to carry out such
work!
Statutory regulations and the connection specifications issued
by the local power supply company must be strictly observed.
When connecting the appliance it must be ensured that there
is a device which makes it possible to disconnect it from the
mains at all poles with a contact opening width of at least
3 mm. Line-protecting switches, fuses or contactors are
suitable cut-out devices.
When connecting and repairing the appliance disconnect it
from the electricity supply with one of these devices.
The earth wire must be sufficiently long so that if the strain
relief fails, the live wires of the connecting cable are subjected
to tension before the earth wire.
Any superfluous cable must be removed from the installation
area beneath the appliance.
Make sure that the local mains voltage is the same as the
voltage on the rating label.
Full protection against accidental contact must be ensured on
installation.
Attention! Incorrect connection may result in the power
electronics unit being destroyed.
No mains cable present in the factory
To connect the appliance, unscrew the switchbox cover on the
underside of the appliance to access the terminal block. After
connecting the appliance, replace the cover and secure the
connection cable with the strain relief clamp.
The connection cable must be at least H05 RR-F.
If the excess cable of this appliance is damaged, it has to be
replaced by the manufacturer, the Customer Service of the
manufacturer or by another qualified person to avoid danger.
Electrical connections
Mains cable available in the factory
The induction hob has been fitted with a temperature-resistant
connection cable in the factory.
Connection to the mains is carried out in accordance with the
circuit diagram, unless the connection cable is already fitted
with a plug.
If damaged, the manufacturer or his customer service must
replace the connection cable installed with a special
connection cable.
Electrical connections
.
*
Attention! Special power supply
230 - 240 V 3~ !
green-yellow
green-yellow
blue
white
brown
black
green-yellow
green-yellow
blue
white
brown
black
green-yellow
green-yellow
blue
white
brown
black
green-yellow
green-yellow
blue
white
brown
black
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg se 2951 id at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg se 2951 id in the language / languages: English as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg se 2951 id

Smeg se 2951 id User Manual - German - 14 pages

Smeg se 2951 id User Manual - Dutch - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info