77271
9
Zoom out
Zoom in
Previous page
1/17
Next page
Operation
GB
25
Automatic switch-off (timer)
The automatic switch-off device is used to automatically switch off any
cooking zone after a stipulated period of time. Cooking times ranging from
1 minute to 99 minutes can be set.
1. Switch on the hob.
2. Switch on one or more cooking zones and set the required power set-
tings.
3. Press the
timer selection button
. The standby dot of the timer will
light up.
Press the button again until the timer indicator lamp of the required
cooking zone blinks.
Important! Timer indicator lamps can only blink if the cooking zones have
already been switched on (power setting higher than 0).
4. Then immediately use the
minus button
or the
plus button
to set
the cooking time at between 1 and 99 minutes.
With the plus button the display will commence at 01, and with the minus
button it will commence at 30.
The setting will be reset if the plus and minus buttons are pressed simul-
taneously (00).
5. In order to program the automatic-switch-off device for another cooking
zone, press the
timer selection button
repeatedly until the timer indi-
cator lamp for the required cooking zone blinks. Then use the
minus but-
ton
or
the plus button
to set the required time.
6. The cooking zone will be switched off when the time has lapsed. A signal
will sound for a while and can be switched off by pressing any button
(except for the on/off button).
Please note
In order to check the time that has lapsed (automatic-switch-off device)
press the
timer selection button
repeatedly until the timer indicator
lamp for the required cooking zone blinks. The setting displayed can be
read and changed.
Terminating the function of the timer: select the respective cooking zone
(timer indicator lamp blinks) and press the plus and minus buttons once at
the same time.
Minute minder (egg timer)
Press the
timer selection button
until the minute minder lamp blinks
with this button. Use the
minus button
or
the plus button
to set the
time in minutes.
Once the time has lapsed a signal will sound for a while and can be
switched off by pressing any button (except for the on/off button).
Note!
The minute minder remains in operation when the induction cooker is
switched off. Switch the hob on with the
on/off button
to adjust the time.
Timer indicator lamp
Stand-by dot for the automatic
Minute minder lamp
switch-off device
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg SE 2931 ID at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg SE 2931 ID in the language / languages: English as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg SE 2931 ID

Smeg SE 2931 ID User Manual - German - 17 pages

Smeg SE 2931 ID User Manual - Dutch - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info