335910
23
Zoom out
Zoom in
Previous page
1/26
Next page
Instructions for the installer
51
11.4 Hob seal
Before installing, check that the hob seal is
attached properly.
Ensure that no liquid gets between the frame of
the hob and the work surface, or between the hob
and the wall, as it could then fall onto appliances
below.
If the hob is installed into a work surface which is
not flat, e.g. ones with ceramic or similar
coverings (tiles, etc.), any seal on the hob must be
removed and the cooking surface must be sealed
using plastic sealant.
Do not fix the hob using silicon as this would make it impossible to uninstall the hob, if necessary,
without damaging it.
11.5 Section cut from the work surface
Cut the work surface
precisely, using a good,
straight saw blade or a
vertical milling cutter. The
surfaces of the cut area
must then be sealed to
prevent the ingress of
moisture.
The area for the hob must
be cut out in accordance
with the appropriate
designs.
The glass ceramic cooking
surface must be perfectly
horizontal and perfectly
sealed. Installing it under
tension could lead to the
plate breaking.
Check that the hob seal is
attached properly.
The hob should be fixed in place using clips or tongues.
X = 770 mm Y = 730 mm
X = 600 mm Y = 560 mm
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg se 2642 id 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg se 2642 id 3 in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg se 2642 id 3

Smeg se 2642 id 3 User Manual - German - 26 pages

Smeg se 2642 id 3 User Manual - Dutch - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info