361454

Smeg scm1-1 Manual

30
Zoom out
Zoom in
Previous page
1/108
Next page
30
4 - USO
I
4.5 Introdurre l’acqua
Può avvenire in due modi: da contenitore o dalla rete idrica.
Da contenitore:
• Estrarre la macchina dal suo alloggio.
• Controllare che l’interruttore 14 per la selezione della fonte idrica sia
posizionato sul simbolo del contenitore.
• Scollegare il tubicino del tappo
T tirandolo verso l’alto.
• Estrarre il contenitore 15 e svitare il tappo
T.
• Riempire il contenitore con acqua fresca potabile e riavvitare il tappo.
• Reinserire il contenitore nel suo alloggio.
• Ricollegare il tubicino al tappo
T premendo fino in fondo.
• Reinserire la macchina nel suo alloggio.
NB: è normale che nel contenitore rimanga una certa quantità d’acqua,
anche se la macchina segnala la sua mancanza.
Da rete idrica:
• Estrarre la macchina dal suo alloggio.
• Controllare che l’interruttore 14 per la selezione della fonte idrica sia po
-
sizionato sul simbolo del rubinetto (in caso di installazione di un rubinetto
a monte dell’elettrovalvola di ingresso acqua 16, accertarsi che questo
sia aperto).
• Reinserire la macchina nel suo alloggio.
NB: è normale che nel contenitore rimanga una certa quantità d’acqua,
anche se la macchina segnala la sua mancanza.
G
R
O
S
S
O
F
I
N
E
BER-146
15
T
14
G
R
O
S
S
O
F
I
N
E
BER-146
14
16
4 - USE
GB
16 17
4.5 Adding water
This can be done in two different ways: either from the container or
from the water mains supply.
From the container:
• Remove the machine from its housing.
• Check that switch
14 to select the water source is pointing to the container
symbol.
• Pull the little tube of cap
T upwards in order to disconnect it.
• Remove container
15 and unscrew cap T.
• Fill the container with fresh drinking water and screw the cap back on.
• Replace the container into position.
• Reconnect the little tube to cap
T and push it down as far as it will go.
• Replace the machine into position.
NB: a certain amount of water will always remain in the container even when
the message appears to say that the container is empty.
From the water mains supply:
• Remove the machine from its housing.
• Check that the switch
14 to select the water source is pointing to the tap
symbol (if a tap has been installed above the water inlet solenoid valve
16, make sure this is open).
• Replace the machine into position.
NB: a certain amount of water will always remain in the container even when
the message appears to say that the container is empty.
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg scm1-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg scm1-1 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 3,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info