75787
9
Zoom out
Zoom in
Previous page
1/26
Next page
37
Instructions for the User
7.2 Using the thermostat-timer knob
7.2.1 Setting the time
After an interruption in the electricity supply, the display flashes at regular
intervals, showing . To set the current time, proceed as described
below.
Turn the THERMOSTAT-TIMER KNOB towards the symbol to increase
the hours at a rising speed in a repetitive cycle from 00 to 23. To increase
the hour value one hour at a time, turn the knob towards the symbol
several times in succession. Once the current hour has been set, release
the knob from the symbol. A few seconds later the current number of
hours will appear on the display in steady mode, while the minutes figures
will flash. Turn the THERMOSTAT-TIMER KNOB towards the symbol
again to increase the minutes in a repetitive cycle from 00 to 180. Once
the correct number of minutes has been set, release the knob from the
symbol. A few seconds later the current time will appear on the display in
steady mode, with the two separator dots flashing every second. You will
also note that the displays luminosity dims. To access the time setting
mode again with the oven in stand-by status, simply hold the thermostat
knob turned to the symbol for 5 seconds, until the display starts to
flash, and repeat the operations just described.
7.2.2 Setting the cooking temperature
Each of this oven's functions has a preset cooking temperature.
When the FUNCTION KNOB is turned to any function (except ) a figure
showing the temperature preset for that function appears on the display
(e.g. ). During preheating, the degrees Centigrade symbol only will
flash, while the numbers remain in steady mode. Once preheating is over,
the degrees Centigrade symbol will also switch to steady mode.
The cooking temperature can be changed at any time by turning the
THERMOSTAT-TIMER knob to the symbol or holding it in this position.
If the knob is held in position, the temperature will increase at a rising
speed in 5°C steps starting from the preset value. To reduce the cooking
temperature from the preset value, increase the value to the full scale
setting (250° or 275° depending on the chosen function), release the knob
from the symbol and turn it to the symbol again. The count will
restart from the minimum value of 50°C.
Warning: if you change function during a cooking operation, the new
temperature recommended for the new function will be displayed; it might
be different from that set for the previous function.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg SC 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg SC 100 in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg SC 100

Smeg SC 100 User Manual - German - 26 pages

Smeg SC 100 User Manual - Dutch - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info