686774
15
Zoom out
Zoom in
Previous page
1/35
Next page
GB-IE
Instructions for the User
14
7.5 When the oven is working…
7.5.1 Interrupting a cooking cycle
You can stop the cooking process at any time by pressing the Start/Stop
key once or by opening the oven door. In both cases:
Microwave emission is stopped immediately.
The grill is de-activated but is still very hot. Danger of burning!
The timer stops and the display shows the remaining amount of
operating time.
If you wish, at this time you can:
Turn or stir the food to ensure it will be evenly cooked.
Modify the process parameters.
Cancel the process by pressing PT2 for 3 seconds.
To restart the process, close the door and press PT2.
7.5.2 Modifying parameters
The operating parameters (time, weight, power, etc.) can only be modified
when the cooking process has been interrupted. Proceed as follows:
Turn PT2 to the right or left to change the function.
Press PT1 to activate the parameter modification mode. The
symbol starts to blink. Turn PT1 to the right or left to change the
remaining cooking duration.
Press PT1 to validate and the next parameter light starts to blink.
Proceed as described in the active function chapter to modify the
remaining parameters.
Press PT2 to continue the cooking process.
7.5.3 Cancelling a cooking cycle
If you wish to cancel the cooking process, press PT2 for 3 seconds.
You will then hear a beep and the oven returns to the OFF setting.
7.5.4 End of a cooking cycle
At the end of the process you will hear three beeps and the display will
show the word “End”.
The beeps are repeated every 30 seconds until the door is opened or PT2
is pressed. The oven returns to the OFF setting.
7.6 Secondary menu
This appliance also has a concealed "secondary menu" allowing the user
to:
1. Activate or deactivate the Show Room function (which disables all the
heating elements so that only the control panel works);
2. Activate or deactivate the function which limits the maximum power
absorption to 2000 W;
3. Activate or deactivate the child safety device ( );
7.6.1 Show Room Function
With the oven in OFF status (see point “7.2 Operating settings”) keep PT1
pressed until the message OFF SHO appears on DSP1. This means that
the SHOW ROOM function (which disables all the heating elements so
that only the control panel works) is not active.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg S845MCPO9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg S845MCPO9 in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info