336356
10
Zoom out
Zoom in
Previous page
1/16
Next page
Instructions for the installer
28
5.5 Re-assembling the hob top
Follow the instructions in “5.1 Removing the hob top” in reverse order.
When re-assembling the couvettes, check that the seals are positioned correctly.
Position the racks as detailed in 7.1Positioning the racks.
5.6 Adjusting the minimum setting for natural gas
Reposition the components on the burner and slide
the knobs onto the tap rods.
Light the burner and set it to the minimum position
.
Extract the knob again and turn the adjustment screw
inside or next to the tap rod (depending on the model)
until the correct minimum flame is achieved.
Refit the knob and verify that the burner flame is
stable (when turning the knob rapidly from the
maximum to the minimum position the flame must not
go out).
5.7 Adjusting the minimum setting for liquid gas
To adjust the minimum setting with liquid gas, you must tighten the screw inside or
next to the tap rod (depending on the model) fully in a clockwise direction.
The by-pass diameters for each individual burner are given in “5.2 Adjustment for liquid
gas”.
After adjustment with a gas other than the preset one, replace the label on the casing
of the appliance with the label corresponding to the new gas. The label is located
inside the GPL nozzle pack (G30 – G31).
5.8 Arrangement of the burners on the hob
Type of burner
1 Auxiliary
2 Semi-rapid
3 Rapid
4 Ultra-rapid
5.9 Lubrication of gas taps
Over time the gas taps may become difficult to turn and get blocked. Clean them
internally and replace the lubrication grease. This procedure must be carried out by
a specialised technician.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg pva140 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg pva140 in the language / languages: English as an attachment in your email.

The manual is 2,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg pva140

Smeg pva140 User Manual - German - 16 pages

Smeg pva140 User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info