332087
9
Zoom out
Zoom in
Previous page
1/15
Next page
Instructions for the Installer
27
5.2 Adjusting for bottled gas
Undo the screw A and push the support B fully down. Remove the nozzle C with a
spanner and fit the suitable one following the instructions in the tables referring to the
type of gas to be used. The nozzle must not be tightened with a torque of more than 3
Nm. Return the support B to its original position, so that the nozzle C is perfectly
covered.
Burner
Nominal
heat
capacity
(kW)
Regulate the air flow by moving the Venturi pipe D until the distance “X” stated in point
"5.5 Adjusting the primary air flow” is obtained and secure it with the screw A. When the
adjustments are complete, restore the seals with wax or an equivalent material.
Bottled gas – G30/G31 30/37 mbar
Nozzle
diameter
1/100 mm
By-pass
mm
1/100
Reduce
d heat
capacity
(W)
Capacity
g/h G30
Capacity
g/h G31
Auxiliary 1.05 48 30 400 76 75
Semi rapid 1.7 62 33 500 124 121
Rapid (3) 3.5 89 50 1050 254 250
Rapid (7) 2.9 80 50 1050 211 207
Rapid (6) 3.1 85 50 1050 225 221
Ultra-Rapid 4.2 98 65 1600 305 300
Internal 0.9 45 30 400 62 61
Double
Crown (4)
External 3.3 87 55 1200 240 236
Internal 0.9 45 30 400 62 61
Double
Crown (8)
External 4.0 95 55 1200 291 286
5.3 Adjusting for natural gas
The appliance is tested with G20 (2H) natural gas at the pressure of 20 mbar. To return the
appliance to the condition required to use this type of gas, proceed as described in point “5.2
Adjusting for bottled gas” but select the nozzles and adjust the primary air flow for natural gas,
as indicated in the table below and in point “5.5 Adjusting the primary air flow”.
Burner
Nominal
heat
capacity
(kW)
Natural gas – G20 20 mbar
Nozzle diameter
1/100 mm
Reduced heat capacity
(W)
Auxiliary 1.05 132 400
Semi rapid 1.7 165 500
Rapid (3) 3.5 250 900
Rapid (7) 2.9 230 1.05
Rapid (6) 3.1 240 900
Ultra-Rapid 4.2 300 1100
Internal 0.9 126 400 Double
Crown (4)
External 3.3 250 1200
Internal 0.9 126 400 Double
Crown (8)
External 4.0 140 1200
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg pts605nl at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg pts605nl in the language / languages: English as an attachment in your email.

The manual is 1,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg pts605nl

Smeg pts605nl User Manual - German - 16 pages

Smeg pts605nl User Manual - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info