76626
28
Zoom out
Zoom in
Previous page
1/32
Next page
64
Instructions for the installer
9. GAS CONNECTION
Before installation, make sure that the local distribution conditions (nature
and pressure of the gas) and the state of regulation of the appliance are
compatible.
Connection to the gas supply network can be made using a rigid copper
hose or a flexible steel hose with a continuous wall and in compliance
with the guidelines established under current legislation.
Once the operation is complete, check the hose fittings for leaks using a
soapy solution; never use a flame. The cooker hob is preset for natural
gas G20 (2H) at a pressure of 20 mbar.
For supplying it with other types of gas, see chapter "10. ADAPTATION TO
DIFFERENT TYPES OF GAS".
The gas inlet connection is threaded ½” external gas (ISO 228-1).
Connection with rigid copper
hose: The connection to the gas
supply network must be carried out
in such a way that it does not cause
stress of any kind to the appliance.
The connection can be made using
the adapter unit D with double cone,
always inserting the supplied gasket
C in between.
Connection with flexible steel
hose: Use only continuous wall
stainless steel hoses that comply
with current legislation, making sure
to always insert the supplied gasket
C between the connection A and the
flexible hose B.
Installation with the flexible hose must be carried out so that the length of
the piping does not exceed 2 metres fully extended; make sure that the
hoses do not come into contact with moving parts and that they are not
crushed in any way.
9.1 Connection to liquid gas
Use a pressure regulator and make the connection on the gas cylinder
following the guidelines established by the regulations in force.
Make sure that the supply pressure complies with the values indicated in
the table at point "10.2 Burner and nozzle characteristics table".
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg PDXF 30 S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg PDXF 30 S in the language / languages: English as an attachment in your email.

The manual is 2,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg PDXF 30 S

Smeg PDXF 30 S User Manual - German - 34 pages

Smeg PDXF 30 S User Manual - Dutch - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info