660455

Smeg P864A-9 Manual

8
Zoom out
Zoom in
Previous page
1/15
Next page
Instructions for the user
25
7.2 Hobs with push-buttons
On first connection to the electrical mains, an operating check will be carried out automatically
and all the indicator lights will come on for a few seconds.
7.2.1 Single plates
When not in use, all hob components will be switched off. If the symbol of any
push-button is pressed for a few seconds, the hob will switch on and the circular
sectors on the buttons indicating the plate controlled by each button will
illuminate.
The power level must be set within 30 seconds after the sectors light up;
otherwise the hob will switch off automatically.
To set the power level use the or push-buttons as follows:
1. press the (0 appears on the display: meaning that the plate has been
switched on);
2. press the (9 appears on the display: meaning that the plate is on at full
power);
3. At this point;
a. Pressing the symbol repeatedly regulates the plate's power setting
from the full power level (9) towards the lowest setting (1);
b. Pressing the symbol repeatedly regulates the plate's power setting
from the lowest power level (1) to the highest setting (9);
4. To switch off the plate, return the display reading to 0 by pressing the or
symbol repeatedly.
A "BEEP" of confirmation is heard whenever the or symbols are pressed.
7.2.2 Dual plates
Operation of plates with dual heating is different from that of those with single
heating. When they are switched on, two indicator lights illuminate beside the
number showing the power level, as shown in the diagram.
When not in use, all hob components will be switched off. If the symbol of any
push-button is pressed for a few seconds, the hob will switch on and the circular
sectors on the buttons indicating the plate controlled by each button will
illuminate.
The power level must be set within 30 seconds after the sectors light up;
otherwise the hob will switch off automatically.
To set the power level use the or push-buttons as follows:
1. press the symbol (0 appears on the display, meaning that the plate is on at
full power);
2. press the symbol again (9 appears on the display, meaning that the small
plate is on at full power);
3. There are now two options available:
a.
• press the symbol once (two markers illuminate beside the 9);
• press the symbol to set the power of the dual plate.
or
b.
• after proceeding as described in point 2, press the the symbol
repeatedly to set the power of the small plate;
4. To switch off the plate, return the display reading to 0 by pressing the
symbol repeatedly.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg P864A-9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg P864A-9 in the language / languages: English as an attachment in your email.

The manual is 2,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg P864A-9

Smeg P864A-9 User Manual - German - 15 pages

Smeg P864A-9 User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info