334648
11
Zoom out
Zoom in
Previous page
1/15
Next page
Instructions for the user
28
8. CLEANING AND MAINTENANCE
Before any intervention, disconnect the power supply of the device.
8.1 Cleaning the glazed ceramic hob
The cooking hob should be regularly cleaned; best after every use, once the residual heat signal
lamps have gone off.
Smudges from aluminium-bottom pans can be easily cleaned off with a cloth
dampened in vinegar.
Remove any burnt residues after cooking with the scraper provided; rinse with water
and wipe dry with a clean cloth. Regular use of the scraper considerably reduces the
need for chemical detergents for the daily cleaning of the hob.
Never use abrasive or corrosive detergents (e.g. cleaning powders, oven sprays,
spot-removers, wire sponges).
8.2 Cleaning stainless steel
8.2.1 Ordinary Daily Cleaning
To clean and preserve the stainless steel surfaces, always use only specific products that do not
contain abrasives or chlorine-based acids.
How to use: pour the product on a damp cloth and wipe the surface, rinse thoroughly and dry with a
soft cloth or deerskin.
Do not use metallic sponges or sharp scrapers: they will damage the surface.
Use normal non-abrasive products for steel, and a wooden or plastic tool if necessary.
Rinse thoroughly and dry with a soft cloth or deerskin.
Do not allow residues of sugary foods (such as jam) to set inside the oven. If left to set for
too long, they might damage the enamel lining of the oven.
NEVER USE A STEAM JET TO CLEAN THE APPLIANCE.
9. SOMETHING WRONG?
PROBLEM POSSIBLE CAUSES WHAT TO DO?
The hob doesn’t work
- The hob is not wired in or - Switch on at the wall
switch on at the wall.
- There is a power failure - Check power supply
The results of cooking are
unsatisfactory
- Temperature is too high or - Consult cooking tips
too low
- Wrong shelf position
- Wrong type of dish
- Cooking time is incorrect
The hob smokes
- The hob is dirty - Clean the hob once cooking
is finished. Let it cool first.
- Food has spilled over - Use a larger pan
The plates do not come on
during timed cooking
- Timed cooking programming - Check the instruction for
error. timer
The front panel will light up but
the plates will not switch on
- DEMO mode is now - Refer to paragraph “7.2.11
activated “DEMO” mode” for how to
deactivate DEMO mode
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg p 773 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg p 773 1 in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg p 773 1

Smeg p 773 1 User Manual - German - 15 pages

Smeg p 773 1 User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info