335882
6
Zoom out
Zoom in
Previous page
1/14
Next page
Instructions for the installer
23
4. Gas connection
If the appliance is installed on an oven, the gas pipe must not be passed along the
back of the oven, as this may cause overheating.
Connection to the gas mains may be made with a rigid copper pipe or with a flexible
pipe and conforming to the provisions defined by standard regulations in force.
On some models, for easier connection the union A on the back of the appliance can
be adjusted sideways. For this purpose, loosen hexagon nut B, turn fitting A to the
desired position, and retighten hexagon nut B (tightness is ensured by a biconical
brass ring). Use a soapy solution to check for proper tightness. Never use a free flame.
On some model the connection to the pipe must by made using a 90° union. The union
H cannot be turned.
The hob has been inspected for G20 (2H) natural gas at a pressure of 20 mbar. For
use with other types of gases, see Section “5. Adapting to different types of gas ”. The
gas intake fitting is ½” gas external threaded (ISO 228-1).
Connection with rigid copper pipe: the connection to
the gas mains must not provoke stress of any kind on the
hob. Connection may be made by using biconical adapter
D with insertion of gasket C (supplied).
Connection with copper pipe and 90° union (only on
some models): the connection to the gas mains must
not provoke stress of any kind on the hob. The
connection must be made using a 90° F union, fitting the
seal C provided in all cases. Screw the union F onto the
gas train H of the hob using 2 spanners in opposite
directions.
Connection with flexible pipe (All models): use only
flexible pipes conforming to standard regulations in force,
inserting gasket C (supplied) between fitting A and
flexible pipe E.
The flexible pipe has to be installed so that pipe length does not exceed 1.5 meters of
maximum extension. Make sure that the pipes do not touch any moving parts or
become damaged.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg p 106 inox at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg p 106 inox in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg p 106 inox

Smeg p 106 inox User Manual - German - 15 pages

Smeg p 106 inox User Manual - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info