686773
14
Zoom out
Zoom in
Previous page
1/29
Next page
16
16 / EN
3.4. First use
1. Remove any protective film from the outside
or inside of the appliance, including
accessories.
2. Remove any labels (apart from the rating
plate) from the accessories and from the
oven cavity.
3. Remove and wash all the appliance
accessories (see 4 Cleaning and
Maintenance).
4. Heat the empty oven at maximum
temperature (using traditional functions) so
as to remove any manufacturing residues.
For the first heating use a traditional
function and not a microwave function.
3.5. Using the oven
Opening the door
To open the door press PT1 briefly.
Operating modes
This product is programmed to provide 3 operating
settings, which can be\modified by pressing PT2.
Stand-by: activated as soon as the current time
has been confirmed, with DSP1 on and showing
the current time
ON: from the standby setting, press PT2 once. All
the displays and knobs light up.
OFF: from the ON setting, press PT2 once.
Only the symbol on DSP1 remains on.
The heating system is not activated
immediately in any of these functions, in order
to improve operator safety.
Setting the time
On the first use,or after a power failure will
be flashing on the appliance’s display. To be able
to start any cooking function, the current time must
be set.
1. Press PT1 for 3 seconds to set the current time.
2. Turn PT1 to the right and left to increase or
decrease the hours.
3. Press it once to move on to setting the minutes.
4. Turn it the right and left to increase or decrease
the hours and press it to set the current time.
5. The symbol will appear on the display,
which will stop flashing.
6. Press PT1 again and the minutes will Flash,
turn right left to set the minutes.
7. Press PT and the time is set.
Setting the current time
It might become necessary to change the current
time, for example at the switch from summer to
winter time. To do this, start from the standby
setting (see Operating modes”). Now repeat the
operations described in point “Setting the time”.
It is not possible to change the time if
the oven is ON.
Selecting the function
1. In the ON state only, a cooking function can be
selected by simply turning PT2 to the right or
left.
2. The function selected will change colour to
orange on DSP3.
3. The preset cooking time will be displayed on
DSP1 and the preset parameters (temperature,
microwaves power, weight) are displayed in
alternation on DSP2.
02:30
02:30
Use
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg MP822 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg MP822 in the language / languages: English as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info