682796
19
Zoom out
Zoom in
Previous page
1/39
Next page
User instructions
19
DELAYING THE PROGRAM
The PROGRAM DELAY button can be pressed to delay the start of
the washing program by 1 up to 24 hours. This means that the dishwasher
can be operated at the time of day of your choice.
Press the PROGRAM DELAY button again; the INFORMATION
DISPLAY (6) will show the number of hours of delay with which the appliance
will start.
After setting the delay, start the program: press the START/PAUSE button
(4) for a few seconds, until the PROGRAM STARTED light starts flashing.
The appliance will prewash the dishes, after which the “program delay” set
previously will come into effect.
To cancel the program delay once the wash has started, proceed as
follows:
Press the START/PAUSE button (4) for a few seconds, until the
PROGRAM STARTED light stops flashing;
Press the PROGRAM DELAY button several times until the
program delay returns to zero;
Press the START/PAUSE button (4) to start the program.
Flexi Tabs
Ideal for multi-function detergents, this option allows washing to be
optimised, with full benefits from the combined-action tablets. When this
option is activated, any salt and rinse aid in the relative containers will not
be used.
If the option is not provided, we recommend the use of conventional
products (separate detergent, salt and rinse aid), because with
conventional washing cycles, combined products might create problems
such as a white deposit, poor drying results and residues left on dishes.
N.B.:
When the salt and rinse aid containers are empty, the relative lights will
remain on even if the “Flexi Tabs option is selected.
IMPORTANT:
when no longer required, the option must be deactivated by pressing the
relative button (the light goes out).
If the water hardness has been set on a value
above
H3
, and the “Flexi
Tbas option is activated, the relative light flashes, warning of a setting
error. Multi-function products are not suitable for use with very "hard"
water; this does not prevent the use of the option, but the washing results
might not be of the best.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg LSP4323XDE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg LSP4323XDE in the language / languages: English as an attachment in your email.

The manual is 2,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg LSP4323XDE

Smeg LSP4323XDE User Manual - German - 43 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info