125965
24
Zoom out
Zoom in
Previous page
1/28
Next page
User instructions
49
6. Troubleshooting
The dishwasher is equipped with a self-diagnostics system that is capable of detecting and
signalling a number of possible faults.
In the event of a fault or malfunction,
before calling the After-sales service centre
, we suggest
that you first consult the troubleshooting guide below.
If the problem persists even after implementing the recommended solutions, call the After-sales
service centre
after
having carried out the following:
making a note of the message displayed by the self-diagnostics system;
unplug the power cord from the socket;
shut off the water supply tap;
TABLE OF FAULTS DETECTED BY THE SELF-DIAGNOSTICS SYSTEM
FAULT DESCRIPTION
E1
The dishwasher’s AQUASTOP anti-flooding system has been activated (only for models
equipped with the device).
To disable the AQUASTOP: switch off the dishwasher and then switch it back on again.
The triggering of the AQUASTOP device indicates
the presence of a water leak
; immediately
after resetting the dishwasher it is therefore necessary to call the authorised After-sales service
centre.
E2
The system for limiting the water level in the dishwasher has been triggered.
To reset the appliance, reprogram the wash by opening and closing the door and then pressing the
START/STOP (5)
button again.
If the problem persists, call the authorised technical service centre.
E3
The dishwasher fails to heat the water.
To reset the appliance, open and close the door.
To determine the cause of this problem call the authorised technical service centre.
E5
The dishwasher fails to draw water.
Check that:
the water supply tap is open;
the filter in the water intake hose is not clogged;
the water intake hose is not kinked or bent;
Turn the dishwasher off and then on again, then press the
START/STOP (5)
button again. If the
problem is resolved the washing program will resume from where it was halted.
If the fault persists, call the authorised technical service centre.
E6
The dishwasher fails to drain.
Check that:
the flexible drain hose is not kinked or obstructed;
the water drain pipe is not obstructed;
the dishwasher filter is not clogged;
Turn the dishwasher off and then on again, and then press the
START/STOP (5)
button again. If
the problem is resolved, the washing program will resume from where it was halted.
Otherwise, if the fault persists, call the authorised technical service centre.
In the event of error codes not included in this table, call the Technical Service Centre.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg ls 19 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg ls 19 1 in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg ls 19 1

Smeg ls 19 1 User Manual - German - 28 pages

Smeg ls 19 1 User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info